Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Thumbnails are displayed in the thumbnail drawer in the scan window in the order shown<br />
below.<br />
Direction of<br />
insertion<br />
Cautions<br />
Do not place negative and positive film in the holder at the same time.<br />
To avoid damaging the film, use a blower to remove dust and lint from the film and holder.<br />
Leaving dust, lint, or other foreign objects on the film or holder during scanning could result in<br />
reduced image quality or in damage to the film.<br />
Mounts must be 1.0–3.2 mm in thickness. Other mounts can not be used.<br />
Do not use force when inserting slides. Failure to observe this precaution could damage the clips<br />
that hold the mounts in place. Should you encounter resistance, try inserting the slides at a slight<br />
angle.<br />
Be sure to insert slides between the guides. The scanner may not be able to adjust focus correctly<br />
if slides are placed on top of the guides. Inserting the slides on top of the guides could also<br />
damage the clips that hold the mounts in place.<br />
97
Change language