Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Using the FH-816 Holder for 16-mm Film Strips<br />
The FH-816 is used when scanning strips of 16-mm film up to twenty frames in length. Up to<br />
three film strips can be placed in the holder at a time.<br />
Insert your fingers into the holes in the lower portion holder to unlatch the hooks holding the<br />
upper cover in place, then open the holder.<br />
Hooks (× 2)<br />
Upper cover<br />
Place the film to be scanned in the holder with the matte emulsion surface down (the shiny<br />
surface up) and the frames aligned with the apertures in the lower portion of the holder. Close<br />
the upper cover so that the latches click into place.<br />
Cautions<br />
Use only one type of film at a time. Do not place negative and positive film in the holder at the<br />
same time.<br />
To avoid damaging the film, use a blower to remove dust and lint from the film and holder.<br />
Leaving dust, lint, or other foreign objects on the film or holder during scanning could result in<br />
reduced image quality or in damage to the film.<br />
107
Change language