You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Using the FH-869GR Glass-Covered Rotating Holder for Brownie Film<br />
The FH-869GR is used when scanning medium-format (120/220) film, 59 mm × 82 mm film for<br />
electron microscopes, or 24 × 65 panorama film. Film can be adjusted by ±5° to compensate<br />
for camera angle. Multi-frame strips can be scanned one frame at a time without cutting the<br />
film into strips one frame long.<br />
Slide the knob in the direction shown below and open the upper cover.<br />
Sliding knob<br />
Place a masking sheet appropriate to the size of film to be scanned in the holder, aligning the<br />
holes in the masking sheet with the guide pins in the holder. Place the film between the guide<br />
rails, with the matte emulsion surface down (shiny side up). Align the frame to be scanned<br />
with the aperture in the masking sheet. Close the upper cover so that the latch clicks into<br />
place.<br />
Masking sheet<br />
Upper cover<br />
Guide pins<br />
103