Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Step 2—Place the Film in the Holder<br />
Place the film to be scanned in the holder with the matte emulsion surface down (the shiny<br />
surface up) and the frames aligned with the apertures in the lower portion of the holder.<br />
58<br />
Apertures<br />
Place the second strip of film in the holder as described above, aligning it with the next row of<br />
apertures. Neither strip should be longer than the row of apertures.<br />
Scanning Single Strips<br />
When scanning film strips one at a time, be sure to cover the remaining<br />
apertures with a masking sheet. Place the film at the front of the<br />
holder, where frame numbering starts. For more information, see page<br />
81 of this manual.
Change language