section 7 - Index of

More documents

Recommendations

Info

WAIT Wait for Interrupt WAITOperation:Disable clocks to the processor core andenter the WAIT processing state.Assembler Syntax:WAITDescription: Enter the WAIT processing state. The internal clocks to the processor coreand memories are gated off, and all activity in the processor is suspended until anunmasked interrupt occurs. The clock oscillator and the internal I/O peripheral clocksremain active. If WAIT is executed when an interrupt is pending, the interrupt will be processed;the effect will be the same as if the processor never entered the WAIT state andthree NOPs followed the WAIT instruction. When an unmasked interrupt or external(hardware) processor RESET occurs, the processor leaves the WAIT state and be,ginsexception processing of the unmasked interrupt or RESET condition. The BRlBG circuitsremain active during the WAIT state. The WAIT state is a low-power standby state. Theprocessor always leaves the WAIT state in the T2 clock phase (see the DSP56001Advance Information Data Sheet (ADI1290)). Therefore, multiple processors may besynchronized by having them all enter the WAIT state and then interrupting them with acommon interrupt.Restrictions: A WAIT instruction cannot be used in a fast interrupt routine.A WAIT instruction cannot be the last instruction in a DO loop (at LA).A WAIT instruction cannot be repeated using the REP instruction.Example:WAIT;enter low power mode, wait for interruptExplanation of Example: The WAIT instruction suspends normal instruction executionand waits for an unmasked interrupt or external RESET to occur.
WAIT Wait for Interrupt WAITCondition Codes:I LF I OM I T I ** I S1 I SO I 11 I 10 I s I L E I u N I zGGR15 14 13 12 11 10 9 8 7 6 5 4 3 2 oThe condition codes are not affected by this instruction.Instruction Format:WAITOpcode:23 16 15 87010 0 0 0 0 0 0 0100 0 0 0 00 01100001101Instruction Fields:NoneTiming: The WAIT instruction takes a minimum of 16 cycles to execute when an internalinterrupt is pending during the execution of the WAIT instructionMemory: 1 program word-
Page 3 and 4:
DSP56K FAMILY INTRODUCTIONDSP56K CE
Page 5:
Motorola reserves the right to make
Page 8 and 9:
Table of Contents (Continued)Paragr
Page 10 and 11:
ParagraphNumberTable of Contents (C
Page 13 and 14:
FigureNumberList of Figures (Contin
Page 15:
List of Tables (Continued)TablePage
Page 19 and 20:
1.1 INTRODUCTIONThe DSP56K family i
Page 21 and 22:
Fewer componentsStable, determinist
Page 23 and 24:
Digital FilteringFinite Impulse Res
Page 25 and 26:
architecture matches the shape of t
Page 27 and 28:
• DSP56001 Compatibility - All me
Page 29:
SECTION 2DSP56K CENTRAL ARCHITECTUR
Page 32 and 33:
--I«a:w:ca.ffi~a. a.24-Bit 56KModu
Page 34 and 35:
-rectly addressable registers: the
Page 37 and 38:
3.1 DATA ARITHMETIC LOGIC UNITThis
Page 39 and 40:
3.2.1 Data ALU Input Registers (X1,
Page 41 and 42:
"""""" 24 BITS;:~:>~~::~~~:~:~:~:::
Page 43 and 44:
3.2.4 Accumulator ShifterThe accumu
Page 45 and 46:
Table 3-1 Limited Data ValuesDestin
Page 47 and 48:
_--- N BITS ---_TWOS COMPLEMENT INT
Page 49 and 50:
CASE I: IF AO < $800000 (1/2), THEN
Page 51 and 52:
one instruction cycle. The ANDI ins
Page 53:
3.5 DATA ALU PROGRAMMING MODELThe D
Page 57 and 58:
4.1 ADDRESS GENERATION UNIT AND ADD
Page 59 and 60:
!---LOWADDRESS ALU -----I~.j.I.....
Page 61 and 62:
•••••••• _ ........
Page 63 and 64:
4.4.1 Address Register Indirect Mod
Page 65 and 66:
EXAMPLE: MOVE BO,V: (R1)+BEFORE EXE
Page 67 and 68:
EXAMPLE: MOVE X1,X: (R2)+N2BEFORE E
Page 69 and 70:
EXAMPLE: MOVE Y1,X: (RS+NS)BEFORE E
Page 71 and 72:
Table 4-2 Address Modifier SummaryM
Page 73 and 74:
ADDRESS -f-_POINTERUPPER BOUNDARYiM
Page 75 and 76:
EXAMPLE: MOVE XO,X:(R2)+NLET:M2 00
Page 77 and 78:
oundary gives a 16-bit binary numbe
Page 79 and 80:
4.4.2.4 Address-Modifier-Type Encod
Page 81:
SECTION 5PROGRAM CONTROL UNIT-
Page 84 and 85:
X MEMORYRAM/ROMIII E:XPAf'JSIC)N LI
Page 86 and 87:
interruptible since they are fetche
Page 88 and 89:
PROGRAM CONTROL UNIT-23 1615 023 16
Page 90 and 91:
The GGR is a special purpose contro
Page 92 and 93:
If S 1 =0 and SO=O (no scaling)then
Page 94 and 95:
-23 876543210I * 1* JSO I * I Mel y
Page 96 and 97:
5.4.5.1 Stack Pointer (Bits 0-3)The
Page 98 and 99:
-DATA ARITHMETIC LOGIC UNITINPUT RE
Page 101 and 102:
6.1 INSTRUCTION SET INTRODUCTIONThe
Page 103 and 104:
shown in Figure 6-2. Most instructi
Page 105 and 106:
23 87 0L...-I ___-'-I_---'I BUS~ LS
Page 107 and 108:
The MR and CCR may be accessed indi
Page 109 and 110:
6.3.4 Operand ReferencesThe DSP sep
Page 111 and 112:
Some address register indirect mode
Page 113 and 114:
EXAMPLE A: IMMEDIATE INTO 24-BIT RE
Page 115 and 116:
EXAMPLE A: IMMEDIATE SHORT INTO AO,
Page 117 and 118:
EXAMPLE A: MOVE P: $3200,XOBEFORE E
Page 119 and 120:
Table 6-1 Addressing Modes SummaryA
Page 121 and 122:
6.4.2 LogicallnstructlonsThe logica
Page 123 and 124:
START OF LOOP1)SP+ 1 • SP; LA. SS
Page 125 and 126:
OPCODE/OPERANDSPARALLEL MOVE EXAMPL
Page 127:
SECTION 7PROCESSING STATES-
Page 130 and 131:
Each instruction requires a minimum
Page 132 and 133:
second instruction of the downloade
Page 134 and 135:
The DO instruction is another instr
Page 136 and 137:
SP and SSH/SSL register manipulatio
Page 138 and 139:
7.3.1 Interrupt TypesThe DSP56K rel
Page 140 and 141:
Table 7-2 Status Register Interrupt
Page 142 and 143:
7.3.3 Interrupt SourcesInterrupts c
Page 144 and 145:
interrupts makes it very useful for
Page 146 and 147:
MAINPROGRAMFETCHESLONG INTERRUPTSER
Page 148 and 149:
7.3.3.3 Other Interrupt SourcesOthe
Page 150 and 151:
7.3.4 Interrupt ArbitrationInterrup
Page 152 and 153:
7.3.7 Interrupt Instruction Executi
Page 154 and 155:
MAINPROGRAMMEMORYINTERRUPT SYNCHRON
Page 156 and 157:
MAINPROGRAMFETCHESINTERRUPTSYNCHRON
Page 158 and 159:
MAINPROGRAMFAST INTERRUPTVECTORLONG
Page 160 and 161:
MAINPROGRAMFETCHESNTERRUPTSYN8HRCNZ
Page 162 and 163:
7.5 WAIT PROCESSING STATEThe WAIT i
Page 164 and 165:
The stop processing state halts all
Page 166 and 167:
the first instruction fetch). If th
Page 168:
RESET -----------------------------
Page 172 and 173:
16 - BIT INTERNALADDRESS BUSESX ADD
Page 174 and 175:
8.2.2.1 Address (AO-A15)These three
Page 177:
SECTION 9PLL CLOCK OSCILLATOR-
Page 180 and 181:
X MEMORYRAM/ROMEXPANSION24-Bit56KMo
Page 182 and 183:
23 22 21 20 19 18 17 16 15 14 13 12
Page 184 and 185:
cleared. To enable rapid recovery w
Page 186 and 187:
-CLVCCVCC for the CKOUT output. The
Page 188 and 189:
4. For all input frequencies which
Page 190 and 191:
While the PLL is regaining lock, th
Page 193 and 194:
10.1 ON-CHIP EMULATION INTRODUCTION
Page 195 and 196:
10.2.2 Debug Serial Clock/Chip Stat
Page 197 and 198:
76543210I R/W I GO I EX I RS41 RS31
Page 199 and 200:
shifted in (so a new command is ava
Page 201 and 202:
10.3.4.4 Software Debug Occurrence
Page 203 and 204:
10.4.4 Memory High Address Comparat
Page 205 and 206:
10.6.1 External Debug Request Durin
Page 207 and 208:
PABCIRCULARBUFFERPOINTERDSCKDSOFigu
Page 209 and 210:
are serially available to the exter
Page 211 and 212:
k. ACKI. ClKm. Send command READ FI
Page 213 and 214:
19. ACK20. Send command READ GDB RE
Page 215 and 216:
10.11.6.1 Case 1: Return To The Pre
Page 217:
SECTION 11ADDITIONAL SUPPORTDr. BuB
Page 220 and 221:
The following is a partial list of
Page 222 and 223:
• In-line assembler language code
Page 224 and 225:
I Document 10 I Version Synopsis I
Page 226 and 227:
Page 228 and 229:
I Document ID I Version Synopsis I
Page 230 and 231:
Page 232 and 233:
11.5 MOTOROLA DSP NEWSThe Motorola
Page 234 and 235:
DIGITAL SIGNAL PROCESSINGAlan V. Op
Page 236 and 237:
C Programming Language:Controls:. C
Page 238 and 239:
Image Processing:DIGITAL IMAGE PROC
Page 240 and 241:
LINEAR PREDICTION OF SPEECHJ. D. Ma
Page 243 and 244:
A.1 APPENDIX A INTRODUCTIONThis app
Page 245 and 246:
XnYnTable A-1 Instruction Descripti
Page 247 and 248:
Table A-1 Instruction Description N
Page 249 and 250:
Table A-1 Instruction Description N
Page 251 and 252:
Table A-2 DSP56K Addressing ModesAd
Page 253 and 254:
The address register indirect addre
Page 255 and 256:
A.SCONDITION CODE COMPUTATION15 14
Page 257 and 258:
S1 SO Scaling Mode Signed Integer P
Page 259 and 260:
Table A-5 Condition Code Computatio
Page 261 and 262:
A.7 INSTRUCTION DESCRIPTIONSThe fol
Page 263 and 264:
ABSAbsolute ValueABSInstruction For
Page 265 and 266:
ADC Add Long with Carry ADCresult.
Page 267 and 268:
ADD Add ADDCondition Codes:15 14 13
Page 269 and 270:
ADDL Shift Left and Add Accumulator
Page 271 and 272:
ADDR Shift Right and Add Accumulato
Page 273 and 274:
ANDLogical ANDANDInstruction Format
Page 275 and 276:
ANDIAND Immediate with Control Regi
Page 277 and 278:
ASL Arithmetic Shift Accumulator Le
Page 279 and 280:
ASR Arithmetic Shift Accumulator Ri
Page 281 and 282:
BCHG Bit Test and Change BCHGExplan
Page 283 and 284:
BCHGBit Test and ChangeBCHGInstruct
Page 285 and 286:
BCHGBit Test and ChangeBCHGInstruct
Page 287 and 288:
BCHG Bit Test and Change BCHGNotes:
Page 289 and 290:
BCLR Bit Test and Clear BCLRExplana
Page 291 and 292:
BClRBit Test and ClearBClRInstructi
Page 293 and 294:
BClRBit Test and ClearBClRInstructi
Page 295 and 296:
BClR Bit Test and Clear BClRNotes:
Page 297 and 298:
BSET Bit Test and Set BSETExplanati
Page 299 and 300:
BSETBit Test and SetBSETInstruction
Page 301 and 302:
BSETBit Test and SetBSETInstruction
Page 303 and 304:
BSET Bit Test and Set BSETNotes: If
Page 305 and 306:
BTSTBit TestBTSTCondition Codes:115
Page 307 and 308:
8TSTBit Test8TSTInstruction Format:
Page 309 and 310:
8TSTBit Test8TSTInstruction Format:
Page 311 and 312:
CLRClear AccumulatorCLRInstruction
Page 313 and 314:
CMP Compare CMPCondition Codes:15 1
Page 315 and 316:
CMPM Compare Magnitude CMPMConditio
Page 317 and 318:
DEBUGEnter Debug ModeDEBUGOpcode:23
Page 319 and 320:
DEBUGcc Enter Debug Mode Conditiona
Page 321 and 322:
DEC Decrement by One DECInstruction
Page 323 and 324:
DIV Divide Interation DIVThe DIV in
Page 325 and 326:
DIV Divide Interation DIVNote that
Page 327 and 328:
DIVInstruction Format:DIV S,DDivide
Page 329 and 330:
DO Start Hardware Loop DOexecuted 6
Page 331 and 332:
DOStart Hardware LoopDOAt LAOther R
Page 333 and 334:
DOStart Hardware LoopDOInstruction
Page 335 and 336:
DOStart Hardware LoopDOInstruction
Page 337 and 338:
DO Start Hardware Loop DONotes: If
Page 339 and 340:
ENDDO End Current DO Loop ENDDOExpl
Page 341 and 342:
EOR Logical Exclusive OR EORInstruc
Page 343 and 344:
ILLEGALIllegal Instruction Interrup
Page 345 and 346:
INC Increment by One INCInstruction
Page 347 and 348:
Jcc Jump Conditionally JccRestricti
Page 349 and 350:
JccJump ConditionallyJccEffectiveAd
Page 351 and 352:
JCLR Jump If Bit Clear JCLRRestrict
Page 353 and 354:
JCLRJump If Bit ClearJCLRInstructio
Page 355 and 356:
JCLR Jump If Bit Clear JCLRInstruct
Page 357 and 358:
JMPJumpJMPInstruction Fields:xxx=12
Page 359 and 360:
JSccJump to Subroutine Conditionall
Page 361 and 362:
JScc Jump to Subroutine Conditional
Page 363 and 364:
JSCLR Jump to Subroutine if Bit Cle
Page 365 and 366:
JSCLRJump to Subroutine If Bit Clea
Page 367 and 368:
JSCLRJump to Subroutine If Bit Clea
Page 369 and 370:
JSCLR Jump to Subroutine If Bit Cle
Page 371 and 372:
JSET Jump if Bit Set JSETRestrictio
Page 373 and 374:
JSETJump if Bit SetJSETInstruction
Page 375 and 376:
JSET Jump If Bit Set JSETInstructio
Page 377 and 378:
JSR Jump to Subroutine JSRInstructi
Page 379 and 380:
JSSET Jump to Subroutine if Bit Set
Page 381 and 382:
JSSETJump to Subroutine if Bit SetJ
Page 383 and 384:
JSSET Jump to Subroutine if Bit Set
Page 385 and 386:
LSL Logical Shift Left LSLCondition
Page 387 and 388:
LSR Logical Shift Right LSRConditio
Page 389 and 390:
LUALoad Updated AddressLUACondition
Page 391 and 392:
MAC Signed Multiply-Accumulate MACC
Page 393 and 394:
MACSigned Multiply-AccumulateMACTim
Page 395 and 396:
MACR Signed Multiply-Accumulate and
Page 397 and 398:
MACR Signed MUltiply-Accumulate and
Page 399 and 400:
MOVE Move Data MOVEExplanation of E
Page 401 and 402:
MOVE Move Data MOVEWhen a 56-bit ac
Page 403 and 404:
No Parallel Data MoveInstruction Fo
Page 405 and 406:
I Immediate Short Data Move IExampl
Page 407 and 408:
I Immediate Short Data Move IDDD d
Page 409 and 410:
R Register to Register Data Move RE
Page 411 and 412:
R Register to Register Data Move RI
Page 413 and 414:
uAddress Register UpdateuInstructio
Page 415 and 416:
X: X Memory Data Move X:Note:Due to
Page 417 and 418:
X: X Memory Data Move X:S D DS,D d
Page 419 and 420:
X: X Memory Data Move X:S D DS,D d
Page 421 and 422:
X:R X Memory and Register Data Move
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Y: Y Memory Data Move Y:Note: This
Page 429 and 430:
Y: Y Memory Data Move Y:S D DS,D d
Page 431 and 432:
Y: Y Memory Data Move Y:S D DS,D d
Page 433 and 434:
R:V Register and V Memory Data Move
Page 435 and 436:
R:V Register and Y Memory Data Move
Page 437 and 438:
R:V Register and Y Memory Data Move
Page 439 and 440:
L: Long Memory Data Move L:Example:
Page 441 and 442:
L: Long Memory Data Move L:Instruct
Page 443 and 444:
X: Y: xv Memory Data Move X: Y:Exam
Page 445 and 446:
X: Y: xv Memory Data Move X: Y:S1 D
Page 447 and 448:
MOVEC Move Control Register MOVECst
Page 449 and 450:
MOVEC Move Control Register MOVECCo
Page 451 and 452:
MOVECMove Control RegisterMOVECInst
Page 453 and 454:
MOVEC Move Control Register MOVECTi
Page 455 and 456:
MOVEM Move Program Memory MOVEMoper
Page 457 and 458:
MOVEM Move Program Memory MOVEMInst
Page 459 and 460:
MOVEMMove Program MemoryMOVEMInstru
Page 461 and 462:
MOVEP Move Peripheral Data MOVEPist
Page 463 and 464:
MOVEP Move Peripheral Data MOVEPCon
Page 465 and 466:
MOVEP Move Peripheral Data MOVEPIns
Page 467 and 468:
MOVEP Move Peripheral Data MOVEPIns
Page 469 and 470:
MPY Signed Multiply MPYExplanation
Page 471 and 472:
MPY Signed Multiply MPYInstruction
Page 473 and 474:
MPYR Signed Multiply and Round MPYR
Page 475 and 476:
MPYR Signed Multiply and Round MPYR
Page 477 and 478:
NEGNegate AccumulatorNEGInstruction
Page 479 and 480:
NOPNo OperationNOPInstruction Forma
Page 481 and 482: NORM Normalize Accumulator Iteratio
Page 483 and 484: NOTLogical ComplementNOTInstruction
Page 485 and 486: ORLogical Inclusive ORORInstruction
Page 487 and 488: ORI OR Immediate with Control Regis
Page 489 and 490: REP Repeat Next Instruction REPRest
Page 491 and 492: REPRepeat Next InstructionREPInstru
Page 493 and 494: REPRepeat Next InstructionREPInstru
Page 495 and 496: REP Repeat Next Instruction REPNote
Page 497 and 498: RESETReset On-Chip Peripheral Devic
Page 499 and 500: RND Round Accumulator RNDConvergent
Page 501 and 502: RNDRound AccumulatorRNDInstruction
Page 503 and 504: ROL Rotate Left ROLCondition Codes:
Page 505 and 506: ROR Rotate Right RORCondition Codes
Page 507 and 508: RTIReturn from InterruptRTIConditio
Page 509 and 510: RTSReturn from SubroutineRTSInstruc
Page 511 and 512: sec Subtract Long with Carry secExp
Page 513 and 514: secSubtract Long with CarrysecInstr
Page 515 and 516: STOPStop Instruction ProcessingSTOP
Page 517 and 518: SUB Subtract SUBCondition Codes:S -
Page 519 and 520: SUBL Shift Left and Subtract Accumu
Page 521 and 522: SUBR Shift Right and Subtract Accum
Page 523 and 524: SWISoftware InterruptSWICondition C
Page 525 and 526: Tee Transfer Conditionally Teetion
Page 527 and 528: Tee Transfer Conditionally TeeInstr
Page 529 and 530: TFR Transfer Data ALU Register TFRC
Page 531: TSTTest AccumulatorTSTInstruction F
Page 535 and 536: including the number of words per i
Page 537 and 538: 5. Compute final results.Thus, base
Page 539 and 540: JLC (R2+N2)will requireand will exe
Page 541 and 542: Table A-6 Instruction Timing Summar
Page 543 and 544: Note that the "ap" term in Table A-
Page 545 and 546: Table A-14 Memory Access Timing Sum
Page 547 and 548: Other RestrictionsDO SSH,xxxxJSR to
Page 549 and 550: Immediately before MOVEC from SSH o
Page 551 and 552: A.9.S REP RestrictionsThe REP instr
Page 553 and 554: Table A-18 Triple-Bit Register Enco
Page 555 and 556: Table A-24 Program Control Unit Reg
Page 557 and 558: R: Register to Register Parallel Da
Page 559 and 560: JSSETJSSET#n,X:pp,XXXX#n,Y:pp,xxxx2
Page 561 and 562: JSSET#n,S,xxxx23 16 15 87 000001011
Page 563 and 564: BCHGBCHG#n,X:aa#n,Y:aa23 16 15 87 0
Page 565 and 566: MOVE(M)MOVE(M)S,P:aaP:aa,DREP #XXXR
Page 567 and 568: LUAea,O23 16 15 87 0I 0 0 0 0 0 1 0
Page 569 and 570: ENDDO23 16 15 87 00 0 0 0 0 0 0 o 1
Page 571 and 572: Table A-28 Operation Code QQQ Decod
Page 573 and 574: Table A-30 Special Case #10 P E R C
Page 575 and 576: NEGD23 87 43 0DATA BUS MOVE FIELDLS
Page 577: ADDRS,D23 87 43 oDATA BUS MOVE FIEL
Page 580 and 581: lEI
Page 582 and 583:
Table 8-1 27-MHz Benchmark Results
Page 584 and 585:
.*._---*-----*-------**-------....
Page 586 and 587:
;Latest Revision - September 30, 19
Page 588 and 589:
All coefficients are divided by 2:w
Page 590 and 591:
Real input FFT based on Glenn Bergl
Page 592 and 593:
countountcountcountorg y:coefset 0d
Page 594 and 595:
; Real-Valued FFT for MOTOROLA DSP5
Page 596 and 597:
; first group in the last passmove
Page 599 and 600:
A Accumulator ....... ' ...........
Page 601 and 602:
-H- fast ..........................
Page 603 and 604:
PGND ..............................
Page 605 and 606:
DSP56K FAMILY INTRODUCTIONDSP56K CE
show all

section 7 - Index of

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?