Admin Guide - Mizu Voip

0-no filter: allow all numbers1-allow blacklist „sure” level: 0,1 and 2 (tb_blacklist)2- allow blacklist „sure” level: 0 and 13-allow only blacklist „sure” level: 04-block all blacklist5-allow only knownnumbers (listed in tb_knowngoodnumbers)6- allow only knownnumbers that are 100% ok (sure is 1 in tb_knowngoodnumbers)Dialplan:0: international number format with 00... (e.g.: 003630xxxxxxx)1: international number format with +... (e.g.: +3630xxxxxxx)2: area code + number (0630xxxxxx, 061xxxxxxx)3: shortest possible number (xxxxxxx in the same simpacket or 0630xxxxxxx in other simpacket)4: correct it to the most appropriate format if original is not correctWaitAfterCall: how much time must be elapsed between calls to simcard belonging to this packetMaxMonthlyMinutes: we don’t route more than MaxMonthlyMinutes to simcards belonging to this packetMaxMonthlyMinutesPeak: maximum allowed minutes in peak time / monthMaxMonthlyMinutesOffPeak: maximum allowed minutes in offpeak time / monthMaxMonthlyMinutesWeekend: maximum allowed minutes in weekends / monthMinMonthlyMinutes: this packet will run on higher priority until the min minutes is reachedPrice: default minute price if not set in tb_packetprices (deprecated. Loaded from pricelist from v.3.2)BillingStep: second increments (used for calculation simcards minutes –daily, weekly, peak, offpeak)MinAmmount: min billing seconds (used for calculation simcards minutes –daily, weekly, peak, offpeak)FreeAmmount: free speech seconds (used for calculation simcards minutes –daily, weekly, peak, offpeak)MinCreditOnRoute: if the sim has less credit, then we don’t route call to itMinCreditOnCharge: if the sim has less credit, then we begin trying to charge itPrepaid: 0=postpaid, 1=prepaidSendFakeSMS: we send dummy sms on this simCanCallEachOther: the simcard in this packet will call each other periodically to generate incoming trafficIncludeVAT: used when credit message information are received from simcards (typically via SMS) and the simcards credits are calculated without the VAT valueCurrency: used when the credit messages received needs to be converted in native currency (“currency” global setting) format. If the currency is not the same as the natcurrency and the “convertsimcreditcurrency” global setting is set to true, than the received credit value is converted to the native currency, based on “Currency Convertesettings, found in MManage under the “Billing” sectionMaxAlloc: helper settings when automatically alocating channels for a direction. (Depending on reserverfor simcard setting).Here you can define the maximum count of simcards that can be reserved for the actual packet. Set to 0 to disable rezerving from that packet.Credit Request Command: the command used by the server for sim credit request (used for recharge automation)Credit Charge Command: the command used by the server for sim credit charge (used for recharge automation)The request and the charge command must have the following syntax: