12.07.2015 Views

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ShortTelnumber: sip short telnumber (for example if several users has the same BelongsToCompany field)DisplayName: how the user will be displayed. Can be nullUsername: the most important field. Used for authentification and also as a DID number. This field is unique and cannot be empty.Password: password applicable everywhere (sip, web, VPC, etc)Ip: sipphone, sipproxy or gsmgateway ip address. The server will overwrite with the last known ip addressAuthIp: if we want to authenticate after ip, not after username/passwordMore than one auth ip or domain can be used for a traffic sender. For this the tb_users_authip table is used.NeedAuth:-If NeedAuth is 0, then the system is an open voip relay !!!!-If NeedAuth is 1, then AuthIP must match (usually from SIP traffic senders)-If NeedAuth is 2, then TechPrefix must match (usually from H323)-If NeedAuth is 3, then TechPrefix and IP must match (usually from H323)-If NeedAuth is 4, then user/pwd must match (usually from SIP end-users)-If NeedAuth is 5, then username must match-If NeedAuth is 6, then AuthIP and Port must match-If NeedAuth is 7, then AuthIP and username must match-If NeedAuth is 8, then AuthIP and username/password must match-If NeedAuth is 9 then AuthIP Range must match-If NeedAuth is 10, then AuthIP Range and username/password must matchAddDate: when the user has been inserted in the databaseRights: rights on user interfaces0: no access10: cannot login (disabled)20: can login but no rights30: a normal user40: sales50: admin60: general adminAddedBy: the user id who have added this user (sales, web registration, etc)Commission: used for sales to define their comission percent from the enduser priceReduction: sales user can give to enduser some percent (substracted from their comission)LateFee: applicable when the user is late paying the invoice costPacketID: billing for users, traffic sendersBillingDay: usually 1 (the first day in every month)Qualification: the importance for the user. From 0 to 10. for example if the user has big priority, then we route its calls to better routes

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!