12.07.2015 Views

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Checkmaxlines = 0 ?Checkmaxlinetb=0 ?Maxsessionspeechlen= 1000UL * 60UL * 60UL * 6ULRingtimeout=120MAXEPCOUNTTRESHOLD=30000MAXSUBSMSGCOUNT=99999MAXWRONGMSGALLOWED=9999Running the server as a VPN access point (forced encryption)Fwdregistrations=1 //only from encrypted clients (bug: set to 2)Alternatelocalport=5088 //or any other port; same like the port that was set in the softphone and webphoneAlternatelocalportencrypt=3 //0=default,1=never,2=auto,3=alwaysnormalize_clean=1normalizenumbers=0alloweuserusercalls=false //set to disable user to user callsSet the “encrypt” field for the users to 5 (update tb_users set encrypt = 5 where type = 0)When all the new automatically created users are allowed to use only encrypted comunication, set the autonewusersencrypt to 5.Stop and disable the <strong>Mizu</strong>WebServiceTCP and HTTP tunneling port settings-on the server, set the usehttp and usetcptunnel settings to true-the default port for simple TCP signaling is the same as the main udp port (5060 by default and configurable with the “localtcpport” parameter)-the default port for http tunneling is 80. Set it explicitely if needed with the localhttpport parameter. In the softphone it is controlled by the remotehttpportparameter-the default port for tcp tunneling is 443. Set it explicitely if needed with the localtcptunnelport parameter. In the softphone it is controlled by theremotetcptunnelingport parameter-the default port for TLS signaling is the same as the main udp port + 1 (5061 by default)Client driven upper serverSetup the tunneling server as usually (create a “default” registrar and upper server)Set “allowupperserverselection” to “true”.Create a sip proxy named “upperserver_template”. (this will be a “default” route and default upper server settings)Create one or more server and set the “rdport” field properly.From the client set the sy.uppersrv properly (must match with a rdport or set to a upper server ip:port)This can be done with the upperserver applet parameter or with the UPPERSERVERID define from the softphones.Tunneling signaling and media in the same udp stream

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!