Admin Guide - Mizu Voip

nameX=MyPlugincmdX=MyPlugin.exeX is a number starting from 0 to MAXPLUGINCOUNTThe MManage will pass the database access parameters in the command line.Any other parameter must be readed from the inifile.Command Line: dbserverip,dbport dbname username password connectionstring*Please note that appserverip may differ from dbserverip!Direction parameters will be located under the “parameters” section. Read them as soon as possibile.The following keys are defined:‣ fromdate, todate‣ source, destination‣ fromtype,fromid, frompacket, fromsimid, fromgroup, fromcamp‣ totype, toid, topacket, tosimid, togroup‣ fromname, frompattern‣ toname, topattern‣ fromenabled, toenabled‣ fromidlist; toidlist‣ fromsimidstr; tosimidstr‣ fromip, toip‣ fromsimgrouplist, fromusergrouplist‣ tosimgrouplist, tousergrouplist‣ reloadgroups reloadgroups5.79. Request/response target addressBecause the server will try to send the sip messages to all possibile addresses, sometime it will misroute it.With the denyaddr setting you can restrict the address posibilities. It can be set global or user level.The following values are defined:‣ NULL //will load the default denysetting‣ * //allow all‣ loopbackip, loopbackaddr //127.0…, 0…‣ localip, localaddr //locally configured or autodetected ip/port‣ lanip, lanaddr //192.168, 10.0, etc‣ privateip, privateaddr //local + lan‣ notfromip, notfromaddr //the address from where messages are received‣ notsigip, notsigaddr //the address sent in sip signaling