Admin Guide - Mizu Voip

4.10.3. Calls from databaseCall to any client presented in the central database.4.10.4. Automatic callsWill handle calls automatically if the operator is part of a campaign.4.10.5. Automatic software upgradesMizu client applications can check for newer version and selfupgrade.The following modules are responsible for handling software updates:-TUpdater.exe: to download the new software from a central directory (usually ftp)-TUpdLaunch.exe: will check for new downloaded software on every main software start (will make backup of the old sw)For autoupgrades to work the following tasks must be done:-copy the new software’s in the ftp/specifieddirectory-insert a new record in tb_autoupdateswname: the name of the main software executable that needs to be updated (for example: MAgent)mode: 0: ask the user first, 1: automatic installversion: new software version. make sure that this is correct especially when you use * in “oldversions” to avoid endless update!oldversions: client softwares will check this record to know if the new software can be applied (* mean all)forusers: applicable for this users (* or database user names separated by comma –login names from tb_users)host,username,password,dir: ftp parameters. make sure than the user will have access to the files!files: files that must be updated (separated by comma)comment: will be displayed for users (new features, corrected bugs, etc)Make sure that the version of the new software is bigger than the current and is not in the “oldversions” list, because otherwise will result in an endlessupdate proces!4.11. PBX / IPCentrex functionalityIn addition to supporting class5 features according to sip rfc’s, drafts and recommendations, most of the features normally held on UA are implemented onthe server side also and can be accessed by dtmf messages (client device must be able to send DTMF as INFO or RFC2833 at least)