12.07.2015 Views

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Packet: the type of the SIM CardTodaySpeachLength: the number of active minutes on the current simcard since 00:00ThisMonthSpeachLength: the number of active minutes on the current simcard since the first day of the current monthThisMonthSpeachLengthPeak: the number of minutes since the first day of the current month in peaktimeThisMonthSpeachLengthOffPeak: the number of minutes since the first day of the current month in offpeak timesThisMonthSpeachLengthWeekend: the number of minutes since the first day of the current month in weekendsUsername: Gateway AliasCredit: current credit on the simcards. Refreshed after all calls, and corrected after credit requests (VAT included!)InitialCredit: you may save the initial credit of the simcard hereTpercek: special field for TMobile TminutesAllowedPartners: comma separated list of allowed partners and traffic senders. ‘*’ will allow all. You may restrict the access on gateway or simpacketlevel instead of setting it for all simcards separately. Try to use the packet “allowedpartners” setting and leave it as ‘*’ for the simcards!Prepaid: loaded from the packet settings (1 if prepaid, 0 if postpaid)Datum: the date when the simcard was inserted in the database (first use)Comment: you may place any comment hereLastError: last error message received from the gateway related to the actual simcardLastLog: last log message received from the gateway related to the actual simcardLastFailedCalls: the number of subsequent failed calls (not connected calls)LastWrongCalls: the number of subsequent wrong calls (below the predefined speech length)LastGoodCalls: : the number of subsequent good calls (above the predefined speech length)FieldStrength: combination of last reported field strength value in percent (0-100%) and the rx quality (from 0 to 7. 9 is invalid).Value = field strength*10+rxqual (divide with 10 to get the fieldstrength. The remaining is the rxqual)Pin: the security code of the simcardLastRecTime: : the date-time of the last message received from the simcards. Every channel will send status messages in every 2 minutes and on statuschangesLastCallerid: the destination id of the last call attemptLastDialedNum: the called party number of the last call on the simcardLastCallBegin: the date-time of the last call attempt on the simcardLastCallEnd: the date-time of the last call attempt on the simcardEnabled: set to 0 to disable the simcards instead of deleting itTemporarilyDisabled: you can disable the simcard temporarily for maintenance tasks by setting this value to 1DisabledUntil: used for automatic failovering. If the value is above the current time, the simcard is in failovered stateDisabledCause: last disable cause explainedReenabledCount: how many times have the simcard reenabled after a failoverLastReenabled: the date-time of the last reenabling operationTodayCallCount: call attempts from 00:00ThisMonthCallCount: call attempts from the first day of the current month

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!