Admin Guide - Mizu Voip

MAXALLUSERS: to restrict the total number of users and devices (including endusers,gateways, etc)Devices behind this limit will be disabled (calls blocked)MAXSIPUSERS: to restrict the total number of sip endusers.Users behind this limit will be disabled (calls blocked)MAXGATEWAYS: to restrict the total number of sip, h323 and gsm gateways, gatekeepers and proxies.Gateways behind this limit will be disabled (calls blocked)MAXTRAFFICSENDERS: to restrict the total number of sip traffic sendersTraffic senders behind this limit will be disabled (calls blocked)MAXCHANNELS: to restrict the total number of gsm channels (active simcards)Server will not accept more simcards to be active, thus no calls will be routed to them.MAXCCALS: to log exceeding traffic. When the number of the simultaneous call count exceed this limit, a log entry will be written with the followingtext: “WARNING, max concurrent calls reached (license) [num of calls]”.MAXCALLSBLOCK : call behind this limit will be dropped with “Max concurrent calls reached” reason code.MAXCCALSPERMIN: max number of call setup/minute.MAXSL: max speachlength/day in minutes. All calls will be dropped after this limit is reached.MAXSESSIONSPEECHLEN: max speech length for all calls in miliseconds.MAXREGISTRATIONS: max number of registered users (by the nature of sip registration process, this limit can’t be 100% precise)MAXTAGENTS: max number of maximum MAgent application registrations. There is no way to control wich of the MAgent application will be blocked.(The registration request will be refused when there are more TAgents online than this limit, where “online” means at least registered status in the last 15minutes)The following modules can be added/removed:‣ callcenterout‣ callcenterin‣ extra‣ filtering‣ failower‣ alerting‣ recharge‣ gsmextra‣ sip‣ h323‣ simplatform‣ simbankTo check for more limitations, search the config with the “license” and “max” keyword.