Admin Guide - Mizu Voip

settings checkcallerids wich calls are to be checked on the selfcheck thread (useful if you have wrong traffic senders)settings checkcputime if cputime is constantly highsettings checkcredirights if to check the owner of the sim and chargecardssettings checkgkcdrs if to check cdr records from the gk statusportsettings checkgsmnumlen if to allow incoming number only with this sizesettings checkknownnumbersex 0 = nosettings checklocalnumberpx local endusers prefix to check (to not route to other servers). if emtysettings checklocalnumbers check local endusers on routingsettings checkmaxlines check max used lines to client and partnersettings checkmaxlinetb extended check for max lines (tb_maxlinep)settings checkmaxnumlen max called number length allowedsettings checkminnumlen min called number length allowedsettings checknumlen if to check the incoming number len //14settings checknumport check number portabilitysettings checknumportpx check number portability for this prefixessettings checkpacketfailowering 0=don't checksettings checkprefixes check asr/acd for alerting and wachdog only for this prefixes. must be in the following format: 'xxx'settings checkprefixroules set to 1 to check additional prefix rules. by default only H323 ip prefix rules are appliedsettings checkrouterrights callprefixrights and partner bindingsettings checksss check special numberssettings connectondisccode if to connect the sipcall before to play the disconnect reason. 0=not connectsettings country used in number normalizationssettings countryprefix used on routingsettings creditcheckforpostp check credit for postpaid users too (max limit)settings creditcheckforts check credit for traffic senders toosettings currency local currencysettings dailymainttaskhour when to perform daily maintenance taskssettings dbdelbackupdir1 additional backup directory to cleenupsettings dbdelbackupdir2 additional backup directory to cleenupsettings dbdelbackupdir3 additional backup directory to cleenupsettings dbloglevel db server loglevel (0=only errors to monitor