Admin Guide - Mizu Voip

The most common reason codes are the followings:-SIP, Bye: normal SIP close code-SIP, CANCEL: the call was canceled by the caller (not connected call)-H323, Remote endpoint application cleared call: normal H323 disconnect-H323, Remote endpoint stopped calling: the call was canceled by the caller (not connected call)-GSM, Normal call clearing: normal GSM close code-GSM, Normal unspecified: normal GSM close code-Server, Blacklisted: dropped due to ACL (blacklist)-Wrong Media: no voice activity detected.4.2.6. Line MonitorThis is a simple listing of your channels. You can discover all simcard problems by scrolling down this list. (Missing channels are highlighted)4.2.7. Capacity CheckThis module tests the capacity for the predefined direction in priority order.4.2.8. System LoadShows system utilization statistics.4.2.9. Server ConsoleDirect interface to the server command port. Type help to see the available commands. You can connect directly to any gateway interface.Command defined on gateway interface:help show this command listinfo show status and important parameterscmd launch the predefined processexec launch the predefined processfile will send the requested fileshowlog will send the last lines from the requested filetimeset will sent the current timesetini write to config filegetini read from config filedtmf send dtmfftpget load from ftpftpput put file to ftpselfupgrade do a selfupgrade