12.07.2015 Views

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

Admin Guide - Mizu Voip

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SipSettings maxstatchangepermin max allowed enduser status changes/60 sec (slower if exceed)SIPSettings MAXSUBSMSGCOUNT max subsequent messages before blockSIPSettings MAXSUBSMSGPERIOD max subsequent messages before block are checked for this interval (sec)SIPSettings MAXWRONGMSGALLOWED dos attack protectionSIPSettings MEDIATIMEOUT will disconnect if the media disappearsSIPSettings MEDIATIMEOUTSTART will disconnect if no media detectedSIPSettings MINRESENDIVAL sip udp resend timer (T1) in msecSipSettings MinRTP rtp port range begin for sipSIPSettings MINSPEACHLENONROUTE minimum remained speechlength for the caller when the router will still route the callSIPSettings MINUSERCREDITONROUTE minimum credit for the caller when the router will still route the callSIPSettings MINUSERNAMELEN minimum accepted username lengthSIPSettings PRODUCTNAME the name of the product. this will apear in the sip signalingSipSettings propersipcomments set to true if you want personalized sip headersSIPSettings REBUILDREGCLIENTS usually the same as maxspeachlenSIPSettings REENABLEDOSBLOCKED reenable blocked endpoints after this interval. defaults to 12 hourSIPSettings REGISTERIVAL upper registration interval in msec. defaults to 40 minSIPSettings RELOADPROXYLISTIVAL reload proxies from the configSIPSettings REPOPUPULATEFDSETIVAL used for rtp routingSipSettings REPOPUPULATEFDSETIVAL_MAIN used for main routingSIPSettings rerouteon rerouting behaviour: 0=disabled 1=onlyifset (on busySipSettings resolvedns resolve uri domain namesSipSettings ringtimeout sip calls ring timeoutSIPSettings routepresence route subscribesSipSettings rtpsendonlytorec send the rtp only to the rec addressSipSettings rtpwritefirst send a rtp packet after connect (to open NAT)SipSettings sdpalthandling 0=not handledSipSettings sessiontimer 0: don’t useSipSettings sipmsgresendcount resend sip message countSipSettings sipmsgresendival sip message resend timerSipSettings sipsendtodefport try to send to port 5060 tooSipSettings statussaveival minutes. used when predective is active

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!