Admin Guide - Mizu Voip

Note: dialing, ringing and call ending messages may not be shown in the monitor depending from the gsm gateway configuration.If the “sendallstatus” setting is set to false, than instead of “dialing” and “ringing” only the “speaking” message will be shown.4.6.6. CreditsFor Identification of sms and dtmf messages received from simcards that are useful for credit request and chargeType: 0=other, 1=succ charge without credit info,2=credit start/end, 3=failed charge, 4=need chargeMsgbgn: begins withMsgeng: ends with -used if type is 0 (replace) or 2 (end of credit), 4 (new credit. usually 0)Priority: check order (longer messages usually first, to not include shorter) –higher values first4.6.7. SIM DistributionAll simslots are listed here.Probability values:not sure: the simcards was seen more than one monthprobably: the simcards in the last monthsure: the simcards in the last weekThe other fields are the same as described in section 4.2.2.4.6.8. SIM UtilizationList of simcards in call duration order.4.6.9. New SimcardYou can add new simcards by using this form.However, the simcards are usually added automatically. If they are active in the gateway they will register automatically. Usually only the owner and thepacket must be set manually.4.6.10. New Charge CardAdd new chargecards with this form.The charge card will be charged only on the simpackets selected (“packets for”) and if the owner will match.