Admin Guide - Mizu Voip

Currently running calls are listed here. Calls terminated on Mizu Gateways are displayed in separate list from other directions. You can filter the listing byselecting your preferences in the “Set Direction” box (as you can do in many other parts of the program).The following grouping is available: by caller, by called, by called prefix, by simowner and by sim packet.Field Explanations:Status: engine or simcard status. Can have the following values: Gateway Disabled, Off (no info), Not Active, Gateway Disconnected, Closed, Not Ready,Ready, Dialing, Ringing, Speaking, Call Ending, DTMF, Simulating Outgoing, Simulated Incoming, Routing to SIMID, Routing to Alias, RoutingDuration: seconds elapsed from Setup (not from Connect!)Caller: source name (user name or traffic sender name)Called: destination name (user name or traffic sender name)CallerNumber: the phone number of the caller partyCalledNumber: the phone number of the called partyDialed: number routed to called user or gateway (with techprefix)Line: the number of the gsm channel (usually from 0 to 7)SimPos: the position of the active simslot in the current engine (usually from 0 to 7)SIM Owner: the owner of the SIM CardPacket: the type of the SIM CardTodaySpeachLength: the number of active minutes on the current simcard since 00:00ThisMonthSpeachLength: the number of active minutes on the current simcard since the first day of the current monthSIM ID: sim identification number4.2.3. Basic StatisticsShows the main traffic amount and quality parameters of your system.