Admin Guide - Mizu Voip

global config optionused only for callforward//config.replacecalleronforward = 9; //0=no (default),1=yes,2=yes with username as callername, 3=yes with phonenumber ascallername, 4=yes with username as authname too, 5=yes with phonenumber as authname too 9=autoparseidentityglobal config option0=no at all, 1=normal,2=rewrite caller number,3=rewrite callername alsodefault is 1parsesipdisplaynameglobal config option0=no,1=callername,2=displayname,3=can be used for authdefault is 14.4.5. RulesUsing the “Rules” for you can handle and rewrite almost all SIP fields based on any condition, esepecially the caller and the called number.This form can be used to create both simple and very complex rules. Hold the mouse over the controls to get a context sensitive help.Usage:1. Click on the “Add” button to add a new rule2. Name the new rule as you wish3. Run as: it is usualy fine if you leave the “Auto guess”, however you can specify it more exactly in certain conditions4. Specify the conditions when this rule is executed (for example you might have to reformat the called number if the call is sent via aspecific carrier; in this case use the CalledID to select the carrier)5. Data: specify which data do you wish to load and work with it (for example the callednumber)6. Check: specify additional conditions when this rule is executed (now you can examine the “data” loaded in the previous step)7. Action: specify what you wish to do with the data8. Set: specify how to wish to save back the result (usually “same as loaded data” since most of the case you will just wish to modify afield such as the called number)Additionally you can modify some global configuration options to modify the caller/called number. These are described below: