7918KB - Yamaha
7918KB - Yamaha
7918KB - Yamaha
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
,,,,,,,,,,,,,,,<br />
QQQQQQQQQQQQQQQ<br />
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢<br />
MIDI Functions<br />
,,,,,,,,,,,,,,,<br />
QQQQQQQQQQQQQQQ<br />
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢<br />
128<br />
■ Clock<br />
Reception of an external MIDI clock signal can be enabled or disabled as required.<br />
When disabled (“Off”), all of the time-based functions (Auto Accompaniment, SONG<br />
recording and playback, etc.) are controlled by its own internal clock. When MIDI<br />
clock reception is enabled (“On”), however, all timing is controlled by an external<br />
MIDI clock signal received via the MIDI IN terminal (in this case the PSR-730/630<br />
TEMPO setting has no effect). The default setting is “Off”.<br />
Ext.Cloc k: Off nd Piano<br />
■ Initial Data Send<br />
Transmits all current panel settings to a second PSR-730/630 or a MIDI data storage<br />
device. To send the initial data select the “Init.Send Sure?”. Then press the [+] (YES)<br />
to begin transmission of the initial data.<br />
Init.Sen<br />
d Sure? nd PiYES<br />
If you want to have the song play back with the panel settings used for recording,<br />
execute the Initial Data Send function before recording the performance on the PSR-<br />
730/630 to an external sequencer.<br />
• External Clock is “Off”<br />
be default when the<br />
power is initially turnd<br />
on.<br />
• When External Clock<br />
is turned “On”, AUTO<br />
ACCOMPANIMENT<br />
playback cannot be<br />
started via the panel<br />
[START/STOP] button,<br />
or started via the<br />
synchro start function.<br />
Also, the MULTI PAD<br />
playback cannot be<br />
initiated by pressing<br />
the MULT PADs.<br />
• When External Clock<br />
is turned “On”, “EC”<br />
will appear on the<br />
TEMPO display, and<br />
tempo cannot be<br />
changed with the<br />
panel button.<br />
• During Style/Song/<br />
Multi Pad playback, in<br />
the synchro start<br />
mode and in one of<br />
the Record modes,<br />
the display shows<br />
“Init.Send Sure? - - -”<br />
indicating that you<br />
cannot execute the<br />
initial data send operation.