7918KB - Yamaha

,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Digital Effects
,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
50
■ Select the Effect Type for Effect 1/2
Select one of the 42 effect types for Effect 1 and Effect 2
Use the MENU [▼] and [▲] buttons to move the triangular indicator in the display
next to “DIGITAL EFFECT”. The icon for “DIGITAL EFFECT” will light.
Then use the SUB MENU [▼] and [▲] buttons to select “Effect1” or “Effect2”. The
name of the currently selected type will appear on the right of the top line of the
display.
Referring to the Multi-Effect Type List on page 146, use the [–] and [+] buttons, [1]–
[0] number buttons, or Data Dial to select the desired effect type.
Effect1: 01 Hal l 1
Effect2: 18 Fla nger 1
■ Adjust the Dry/Wet Settings for Effect 1/2
Set the Dry/Wet settings for Effect 1 and Effect 2
Dry refers to an original sound that has no effects applied to it, while Wet means that
effects are applied to a sound. Dry/Wet is a setting value that regulates the level of
effects that are applied.
● Dry/Wet [0]............ Only dry sound is output.
● Dry/Wet [64] ......... Output with the same amount of the dry/wet sounds.
● Dry/Wet [127] ....... Only wet sound is output.
Use the MENU [▼] and [▲] buttons to move the triangular indicator in the display
next to “DIGITAL EFFECT”. The icon for “DIGITAL EFFECT” will light.
Then use the SUB MENU [▼] and [▲] buttons to select “Eff1 Dry/Wet” or “Eff2
Dry/Wet”. The currently set Dry/Wet value will appear on the right of the top line of
the display.
Use the [–] and [+] buttons, the [1]–[0] number buttons, or Data Dial to select the
Dry/Wet value within a range of 0-127.
Eff1Dry/
Wet: 64
Eff2Dry/
Wet: 48
• The Effect 1/2 type
settings may automatically
change when a
panel voice is selected
for R1.
• “** XG Ins Eff” may appear
on the display if
you play back the
songs containing Multi
Effect settings.
• The dry/wet settings
cannot be done for
some of the Effect 1/2
types. In that case, “-
- -” will be displayed.
• The Dry/Wet settings
for Effect 1/2 may automatically
change
when a panel voice is
selected for R1.