7918KB - Yamaha

More documents

Recommendations

Info

,,,,,,,,,,,,,,, QQQQQQQQQQQQQQQ ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ MIDI Functions ,,,,,,,,,,,,,,, QQQQQQQQQQQQQQQ ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ 128 ■ Clock Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled (“Off”), all of the time-based functions (Auto Accompaniment, SONG recording and playback, etc.) are controlled by its own internal clock. When MIDI clock reception is enabled (“On”), however, all timing is controlled by an external MIDI clock signal received via the MIDI IN terminal (in this case the PSR-730/630 TEMPO setting has no effect). The default setting is “Off”. Ext.Cloc k: Off nd Piano ■ Initial Data Send Transmits all current panel settings to a second PSR-730/630 or a MIDI data storage device. To send the initial data select the “Init.Send Sure?”. Then press the [+] (YES) to begin transmission of the initial data. Init.Sen d Sure? nd PiYES If you want to have the song play back with the panel settings used for recording, execute the Initial Data Send function before recording the performance on the PSR- 730/630 to an external sequencer. • External Clock is “Off” be default when the power is initially turnd on. • When External Clock is turned “On”, AUTO ACCOMPANIMENT playback cannot be started via the panel [START/STOP] button, or started via the synchro start function. Also, the MULTI PAD playback cannot be initiated by pressing the MULT PADs. • When External Clock is turned “On”, “EC” will appear on the TEMPO display, and tempo cannot be changed with the panel button. • During Style/Song/ Multi Pad playback, in the synchro start mode and in one of the Record modes, the display shows “Init.Send Sure? - - -” indicating that you cannot execute the initial data send operation.
,,,,,,,,,,,,,,, QQQQQQQQQQQQQQQ ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ MIDI Functions ,,,,,,,,,,,,,,, QQQQQQQQQQQQQQQ ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢ ■ MIDI Template The MIDI settings can be collected into a template (pattern). Just by selecting the template that fits your purpose, you can set all the MIDI settings in one operation. Use the MENU [▲] and [▼] buttons to select the MIDI menu so that the triangular indicator in the display appears next to “MIDI” to the left of the display. Use the SUB MENU [▲] and [▼] buttons so that “Template” appears on the display. Referring to the template list below, use the [–] and [+] buttons or the Data Dial to select a template. MIDI Template list Template : XG Module 1. XG Module All receive channels are set to “Normal.” When using the PSR-730/630 as the multi-timbral XG tone generator. 2. Accordion The receive channels are set as follows: 1ch: Remote, 2ch: Chord, 3ch: Bass, 4-16ch: Off When playing the PSR-730/630 by an external MIDI Accordion. The connected MIDI accordion can play the PSR-730/630 and detect chords and basses in the auto accompaniment section. 3. MIDI Pedal All receive channels are set to “Bass.” When playing the PSR-730/630 using a connected (optional) MIDI pedal. The connected MIDI pedal detects chords and basses in the auto accompaniment section, allowing you to play on-bass chords. 4. Keyboard Out The transmit channels are set as follows: 1ch: Right1, 2ch: Right2, 4ch: Left, 3ch, 5-16ch: Off When outputting the performance data (note on/off messages). Used to play the PSR-730/630 note on/off data with an external tone generator and to record the PSR-730/630 note on/off data to an external sequencer. 5. Acmp.Out The transmit channels 9-16 are set with the Accompaniment tracks. 9-10ch: Rhythms, 11ch: Bass, 12-13ch: Chords, 14ch: Pad, 15- 16ch: Phrases When outputting the style data. Used to play the PSR-730/630 auto accompaniment data with an external tone generator and to record the PSR-730/630 auto accompaniment data to an external sequencer. 6. Song Out All transmit channels are set with the Song tracks 1-16. When outputting the song data. Used to play the PSR-730/630 song data with an external tone generator and to record your entire performance on the PSR-730/630 to an external sequencer. 7. User Other than the above settings 1-6. • When you change the transmit/receive channel settings after selecting one of the templates other than the “User”, the “User” Template will automatically be selected. 129
Page 2 and 3:
This product utilizes batteries or
Page 4 and 5:
2 Touch-sensitive 61-key keyboard f
Page 6 and 7:
4 Panel Controls 6 The Music Stand
Page 8 and 9:
,,,,,,,,,,,,,,, QQQQQQQQQQQQQQQ ¢
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81: ,,,,,,,,,,,,,,, QQQQQQQQQQQQQQQ ¢
Page 132 and 133: ,,,,,,,,,,,,,, QQQQQQQQQQQQQQ ¢¢
Page 134 and 135: PSR-730/630 Display MENU/SUB MENU S
Page 136 and 137: Voice List ,,,,,,,,,,,,,, QQQQQQQQQ
Page 144 and 145: ,,,,,,,,,,,,, QQQQQQQQQQQQQ ¢¢¢
Page 146 and 147: About Digital Effects (Reverb/Choru
Page 148 and 149: About Digital Effects (Reverb/Choru
Page 152 and 153: Refining User Styles with Style Fil
Page 156 and 157: MIDI Data Format ,,,,,,,,,,,,,, QQQ
Page 172 and 173: MIDI Implementation Chart ,,,,,,,,,
Page 176 and 177: Limited Warranty 90 DAYS LABOR 1 YE
Page 178: M.D.G., EMI Division © 1997 Yamaha
show all

7918KB - Yamaha

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?