7918KB - Yamaha

,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Registration Memory
,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
58
On the PSR-730, there are BANK [▼] and [▲] buttons. Pressing these buttons will
directly bring up the registration bank sub menu (example: Bank 1) of the “Regist
Memory”, main menu item, and all you have to do is add the correct number.
BANK MEMORY REGISTRATION MEMORY
3 Register the Settings
While holding the [MEMORY] button, press one of the REGISTRATION
MEMORY buttons — [1] through [4]. The corresponding REGISTRATION MEMORY
number will appear below “REGISTRATION” in the display.
MEMORY REGISTRATION MEMORY
Bank 01:
Naming the Registration Banks
You can give your own names (up to 8 characters) to the registration banks where
you have stored settings.
After recalling the registration settings you wish to name, use the MENU [▲] and
[▼] buttons to move the triangular indicator next to “REGIST MEMORY“ in the menu
list to the left of the display.
Then use the SUB MENU [▲] and [▼] buttons to select “Reg Naming”. The current
name will appear on the top right of the display.
Reg Nami
1 2 3 4
A B
REPEAT
1
ONE TOUCH
SETTING
1 2 3 4 FREEZE
REGISTRATION MEMORY
ng: Reg
-
Reg ist1
ist1
• Any data that was
previously recorded in
the Registration
Memory location you
selected will be
erased and replaced
by the new settings.
• The Registration
Memory contents will
be retained even after
turning the power off.
See page 152 for the
details.