RAE MiniRAE 3000 User's Guide - Geotech

More documents

Recommendations

Info

MiniRAE 3000 User’s GuideNote: You may press [MODE] if you decide that you do notwant to initiate calibration. This will abort the span calibrationand take you directly to the Calibration menu for Zerocalibration.3. Span calibration starts and displays this message:Calibrating...During the Span calibration process, there is a 30-second countdownand the instrument performs the Span calibration automatically. Itrequires no actions on your part.Note: If you want to abort the Span calibration process, press [N/-] atany time during the process. You will see a confirmation message thatsays “Span is aborted!” and then the Zero calibration menu appears.You can then proceed to perform a Zero calibration, perform a Spancalibration, or exit to the topmost Calibration menu.When Span calibration is complete, you see a message similar to this(the value is an example only):Span 1 is done!Reading = 100.0 ppmThe instrument then exits Span calibration and shows the Zerocalibration menu on its display.Note: The reading should be very close to the span gas value.40
MiniRAE 3000 User’s GuideExiting Two-Point Calibration In Basic UserLevelWhen you are done performing calibrations, press [MODE], whichcorresponds with “Back” on the display. You will see the followingmessage:Updating settings…The instrument updates its settings and then returns to the main display.It begins or resumes monitoring.41
Page 1 and 2: MiniRAE 3000User’s GuideRev. CAug
Page 4 and 5: MiniRAE 3000 User’s GuideOptional
Page 6 and 7: MiniRAE 3000 User’s GuideTroubles
Page 8 and 9: MiniRAE 3000 User’s GuideSpecial
Page 10 and 11: MiniRAE 3000 User’s GuideAVERTISS
Page 12 and 13: MiniRAE 3000 User’s GuideThe inst
Page 14 and 15: Measurement range & resolutionMiniR
Page 16 and 17: MiniRAE 3000 User’s GuideCharging
Page 18 and 19: MiniRAE 3000 User’s GuideWARNING!
Page 20 and 21: MiniRAE 3000 User’s Guidemenu, ea
Page 22 and 23: MiniRAE 3000 User’s GuideOperatin
Page 24 and 25: MiniRAE 3000 User’s GuideDuring d
Page 26 and 27: MiniRAE 3000 User’s GuideBasic Us
Page 28 and 29: MiniRAE 3000 User’s GuideAfter th
Page 30 and 31: MiniRAE 3000 User’s GuidePreset A
Page 32 and 33: MiniRAE 3000 User’s GuideAuto/Man
Page 34 and 35: MiniRAE 3000 User’s Guidedisplay.
Page 36 and 37: MiniRAE 3000 User’s GuideOptional
Page 38 and 39: Entering CalibrationMiniRAE 3000 Us
Page 40 and 41: MiniRAE 3000 User’s Guide3. Zero
Page 44 and 45: MiniRAE 3000 User’s GuideThree-Po
Page 46 and 47: MiniRAE 3000 User’s GuideSpan 2 C
Page 48 and 49: MiniRAE 3000 User’s GuideExiting
Page 50 and 51: MiniRAE 3000 User’s GuideThe Cali
Page 52 and 53: MiniRAE 3000 User’s GuideOnce you
Page 54 and 55: MeasurementMiniRAE 3000 User’s Gu
Page 56 and 57: MiniRAE 3000 User’s GuideAlarm Se
Page 58 and 59: MiniRAE 3000 User’s GuideWhen you
Page 60 and 61: MiniRAE 3000 User’s GuideAlarm Ty
Page 62 and 63: MiniRAE 3000 User’s Guide1. Scrol
Page 64 and 65: MiniRAE 3000 User’s GuideDatalog
Page 66 and 67: Snapshot DatalogMiniRAE 3000 User
Page 68 and 69: MiniRAE 3000 User’s GuideUser IDE
Page 70 and 71: MiniRAE 3000 User’s Guide3. Press
Page 72 and 73: MiniRAE 3000 User’s GuideLanguage
Page 74 and 75: MiniRAE 3000 User’s GuideUnit IDT
Page 78 and 79: MiniRAE 3000 User’s GuideEntering
Page 80 and 81: MiniRAE 3000 User’s GuideAdvanced
Page 84 and 85: MiniRAE 3000 User’s GuideAdvanced
Page 86 and 87: MiniRAE 3000 User’s GuideAdjustin
Page 88 and 89: MiniRAE 3000 User’s GuideTransfer
Page 90 and 91: MiniRAE 3000 User’s GuideMaintena
Page 92 and 93:
MiniRAE 3000 User’s GuideTo insta
Page 94 and 95:
MiniRAE 3000 User’s GuideCleaning
Page 96 and 97:
MiniRAE 3000 User’s GuideSampling
Page 98 and 99:
MiniRAE 3000 User’s GuideTroubles
Page 100 and 101:
MiniRAE 3000 User’s GuideRAE Syst
Page 102 and 103:
MiniRAE 3000 User’s GuideRAE Midd
Page 104 and 105:
MiniRAE 3000 User’s GuideAlarm Si
Page 106 and 107:
MiniRAE 3000 User’s GuideCharging
Page 108 and 109:
MiniRAE 3000 User’s GuideWARNINGT
Page 110:
MiniRAE 3000 User’s GuideInlet fl
show all

RAE MiniRAE 3000 User's Guide - Geotech

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?