RAE MiniRAE 3000 User's Guide - Geotech

MiniRAE 3000 User’s GuideRepeat this process until all numbers are entered.When you have completed your selections, press [MODE].You will see two choices: Save and Undo. You have the opportunity toregister the new settings or to change your mind and revert to yourprevious settings.• Press [Y/+] to save the changes.• Press [N/-] to undo the changes and revert to the previoussettings.Data SelectionData Selection allows you to select which types of data are stored andmade available when you offload your datalog to a computer viaProRAE Studio software.You can choose any or all of three types of data (you must choose atleast one):• Average• Maximum• Minimum1. Press [N/-] to step from one option to the next. The highlighterindicates your choice.2. Press [Y/+] to toggle your selection on or off (the check boxindicates “on” with an “X”).3. When you have completed your selections, press [MODE].You will see two choices: Save and Undo. You have the opportunity toregister the new settings or to change your mind and revert to yourprevious settings.• Press [Y/+] to save the changes.• Press [N/-] to undo the changes and revert to the previoussettings.61