RAE MiniRAE 3000 User's Guide - Geotech

More documents

Recommendations

Info

MiniRAE 3000 User’s GuideUnit IDThis three-digit number keeps data separated by instrument when morethan one instrument is used in a network. If multiple sensing units areattempting to communicate with the same Host, then the units must allhave a different Unit ID.1. Press [Y/+] to step through all 10 numerals (0 to 9). If you pass thenumeral you want, keep pressing [Y/+]. After it counts up to 9, itstarts counting up from 0 again.2. Press [N/-] to advance to the next digit. The next digit to the rightflashes.Repeat this process until all three digits of the Unit ID are entered.3. Press [MODE] when you are done.• Press [Y/+] to save the change.• Press [N/-] to discard the change and move to the next submenu.LCD ContrastThe display’s contrast can be increased or decreased from its defaultsetting. You may not need to ever change the default setting, butsometimes you can optimize the display to suit extreme temperatureand ambient brightness/darkness conditions.• The minimum value is 20.• The maximum value is 60.1. Press [Y/+] to increase the value or [N/-] to decrease the value.2. Press [MODE] to save your selection.• Press [Y/+] to save your new contrast value.• Press [N/-] to undo it and return to the previous value.72
MiniRAE 3000 User’s GuideHygiene ModeThe instrument usually operates in Hygiene Mode, which providesbasic functionality. However, it is possible to operate it in a secondmode called Search Mode. Here are the primary differences:Hygiene Mode: Automatic measurements, continuously runningand datalogging, and calculates additionalexposure values.Search Mode: Manual start/stop of measurements and displayof certain exposure values.73
Page 1 and 2:
MiniRAE 3000User’s GuideRev. CAug
Page 4 and 5:
MiniRAE 3000 User’s GuideOptional
Page 6 and 7:
MiniRAE 3000 User’s GuideTroubles
Page 8 and 9:
MiniRAE 3000 User’s GuideSpecial
Page 10 and 11:
MiniRAE 3000 User’s GuideAVERTISS
Page 12 and 13:
MiniRAE 3000 User’s GuideThe inst
Page 14 and 15:
Measurement range & resolutionMiniR
Page 16 and 17:
MiniRAE 3000 User’s GuideCharging
Page 18 and 19:
MiniRAE 3000 User’s GuideWARNING!
Page 20 and 21:
MiniRAE 3000 User’s Guidemenu, ea
Page 22 and 23:
MiniRAE 3000 User’s GuideOperatin
Page 24 and 25: MiniRAE 3000 User’s GuideDuring d
Page 26 and 27: MiniRAE 3000 User’s GuideBasic Us
Page 28 and 29: MiniRAE 3000 User’s GuideAfter th
Page 30 and 31: MiniRAE 3000 User’s GuidePreset A
Page 32 and 33: MiniRAE 3000 User’s GuideAuto/Man
Page 34 and 35: MiniRAE 3000 User’s Guidedisplay.
Page 36 and 37: MiniRAE 3000 User’s GuideOptional
Page 38 and 39: Entering CalibrationMiniRAE 3000 Us
Page 40 and 41: MiniRAE 3000 User’s Guide3. Zero
Page 42 and 43: MiniRAE 3000 User’s GuideNote: Yo
Page 44 and 45: MiniRAE 3000 User’s GuideThree-Po
Page 46 and 47: MiniRAE 3000 User’s GuideSpan 2 C
Page 48 and 49: MiniRAE 3000 User’s GuideExiting
Page 50 and 51: MiniRAE 3000 User’s GuideThe Cali
Page 52 and 53: MiniRAE 3000 User’s GuideOnce you
Page 54 and 55: MeasurementMiniRAE 3000 User’s Gu
Page 56 and 57: MiniRAE 3000 User’s GuideAlarm Se
Page 58 and 59: MiniRAE 3000 User’s GuideWhen you
Page 60 and 61: MiniRAE 3000 User’s GuideAlarm Ty
Page 62 and 63: MiniRAE 3000 User’s Guide1. Scrol
Page 64 and 65: MiniRAE 3000 User’s GuideDatalog
Page 66 and 67: Snapshot DatalogMiniRAE 3000 User
Page 68 and 69: MiniRAE 3000 User’s GuideUser IDE
Page 70 and 71: MiniRAE 3000 User’s Guide3. Press
Page 72 and 73: MiniRAE 3000 User’s GuideLanguage
Page 78 and 79: MiniRAE 3000 User’s GuideEntering
Page 80 and 81: MiniRAE 3000 User’s GuideAdvanced
Page 84 and 85: MiniRAE 3000 User’s GuideAdvanced
Page 86 and 87: MiniRAE 3000 User’s GuideAdjustin
Page 88 and 89: MiniRAE 3000 User’s GuideTransfer
Page 90 and 91: MiniRAE 3000 User’s GuideMaintena
Page 92 and 93: MiniRAE 3000 User’s GuideTo insta
Page 94 and 95: MiniRAE 3000 User’s GuideCleaning
Page 96 and 97: MiniRAE 3000 User’s GuideSampling
Page 98 and 99: MiniRAE 3000 User’s GuideTroubles
Page 100 and 101: MiniRAE 3000 User’s GuideRAE Syst
Page 102 and 103: MiniRAE 3000 User’s GuideRAE Midd
Page 104 and 105: MiniRAE 3000 User’s GuideAlarm Si
Page 106 and 107: MiniRAE 3000 User’s GuideCharging
Page 108 and 109: MiniRAE 3000 User’s GuideWARNINGT
Page 110: MiniRAE 3000 User’s GuideInlet fl
show all

RAE MiniRAE 3000 User's Guide - Geotech

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?