12.07.2015 Views

RAE MiniRAE 3000 User's Guide - Geotech

RAE MiniRAE 3000 User's Guide - Geotech

RAE MiniRAE 3000 User's Guide - Geotech

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Mini<strong>RAE</strong> <strong>3000</strong> User’s <strong>Guide</strong>MaintenanceThe major maintenance items of the instrument are:• Battery pack• Sensor module• PID lamp• Sampling pump• Inlet connectors and filtersNote: Maintenance should be performed by qualifiedpersonnel only.NOTE: The printed circuit board of the instrument is connected tothe battery pack even if the power is turned off. Therefore, it isvery important to disconnect the battery pack before servicing orreplacing any components inside the instrument. Severe damage tothe printed circuit board or battery may occur if the battery packis not disconnected before servicing the unit.Battery Charging & ReplacementWhen the display shows a flashing empty battery icon, the batteryrequires recharging. It is recommended to recharge the instrument uponreturning from fieldwork. A fully charged battery runs a instrument for16 hours continuously. The charging time is less than 8 hours for afully discharged battery. The battery may be replaced in the field (inareas known to be non-hazardous), if required.WARNING!To reduce the risk of ignition of hazardous atmospheres, rechargebattery only in area known to be non-hazardous. Remove andreplace battery only in areas known to be non-hazardous.88

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!