RAE MiniRAE 3000 User's Guide - Geotech

More documents

Recommendations

Info

MiniRAE 3000 User’s Guide1. Scroll through the Datalog sub-menu using the [N/-] key until thedisplay shows the desired parameter to be changed:Clear DatalogIntervalData SelectionDatalog Type2. Press [Y/+] to make your selection. Exit by pressing [MODE] forBack.Clear DatalogThis erases all the data stored in the datalog.Note: Once the datalog is cleared, the data cannot be recovered.Press [Y/+] to clear the datalog. The display asks, “Are you sure?”• Press [Y/+] if you want to clear the datalog. When it has beencleared, the display shows “Datalog Cleared!”• Press [N/-] if you do not want to clear the datalog.The display changes, and you are taken to the next sub-menu, Interval.IntervalIntervals are shown in seconds. The default value is 60 seconds. Themaximum interval is 3600 seconds.1. Press [Y/+] to increase each digit’s value.2. Press [N/-] to advance to the next digit.3. Again, use [Y/+] to increase the number.60
MiniRAE 3000 User’s GuideRepeat this process until all numbers are entered.When you have completed your selections, press [MODE].You will see two choices: Save and Undo. You have the opportunity toregister the new settings or to change your mind and revert to yourprevious settings.• Press [Y/+] to save the changes.• Press [N/-] to undo the changes and revert to the previoussettings.Data SelectionData Selection allows you to select which types of data are stored andmade available when you offload your datalog to a computer viaProRAE Studio software.You can choose any or all of three types of data (you must choose atleast one):• Average• Maximum• Minimum1. Press [N/-] to step from one option to the next. The highlighterindicates your choice.2. Press [Y/+] to toggle your selection on or off (the check boxindicates “on” with an “X”).3. When you have completed your selections, press [MODE].You will see two choices: Save and Undo. You have the opportunity toregister the new settings or to change your mind and revert to yourprevious settings.• Press [Y/+] to save the changes.• Press [N/-] to undo the changes and revert to the previoussettings.61
Page 1 and 2:
MiniRAE 3000User’s GuideRev. CAug
Page 4 and 5:
MiniRAE 3000 User’s GuideOptional
Page 6 and 7:
MiniRAE 3000 User’s GuideTroubles
Page 8 and 9:
MiniRAE 3000 User’s GuideSpecial
Page 10 and 11:
MiniRAE 3000 User’s GuideAVERTISS
Page 12 and 13: MiniRAE 3000 User’s GuideThe inst
Page 14 and 15: Measurement range & resolutionMiniR
Page 16 and 17: MiniRAE 3000 User’s GuideCharging
Page 18 and 19: MiniRAE 3000 User’s GuideWARNING!
Page 20 and 21: MiniRAE 3000 User’s Guidemenu, ea
Page 22 and 23: MiniRAE 3000 User’s GuideOperatin
Page 24 and 25: MiniRAE 3000 User’s GuideDuring d
Page 26 and 27: MiniRAE 3000 User’s GuideBasic Us
Page 28 and 29: MiniRAE 3000 User’s GuideAfter th
Page 30 and 31: MiniRAE 3000 User’s GuidePreset A
Page 32 and 33: MiniRAE 3000 User’s GuideAuto/Man
Page 34 and 35: MiniRAE 3000 User’s Guidedisplay.
Page 36 and 37: MiniRAE 3000 User’s GuideOptional
Page 38 and 39: Entering CalibrationMiniRAE 3000 Us
Page 40 and 41: MiniRAE 3000 User’s Guide3. Zero
Page 42 and 43: MiniRAE 3000 User’s GuideNote: Yo
Page 44 and 45: MiniRAE 3000 User’s GuideThree-Po
Page 46 and 47: MiniRAE 3000 User’s GuideSpan 2 C
Page 48 and 49: MiniRAE 3000 User’s GuideExiting
Page 50 and 51: MiniRAE 3000 User’s GuideThe Cali
Page 52 and 53: MiniRAE 3000 User’s GuideOnce you
Page 54 and 55: MeasurementMiniRAE 3000 User’s Gu
Page 56 and 57: MiniRAE 3000 User’s GuideAlarm Se
Page 58 and 59: MiniRAE 3000 User’s GuideWhen you
Page 60 and 61: MiniRAE 3000 User’s GuideAlarm Ty
Page 64 and 65: MiniRAE 3000 User’s GuideDatalog
Page 66 and 67: Snapshot DatalogMiniRAE 3000 User
Page 68 and 69: MiniRAE 3000 User’s GuideUser IDE
Page 70 and 71: MiniRAE 3000 User’s Guide3. Press
Page 72 and 73: MiniRAE 3000 User’s GuideLanguage
Page 74 and 75: MiniRAE 3000 User’s GuideUnit IDT
Page 78 and 79: MiniRAE 3000 User’s GuideEntering
Page 80 and 81: MiniRAE 3000 User’s GuideAdvanced
Page 84 and 85: MiniRAE 3000 User’s GuideAdvanced
Page 86 and 87: MiniRAE 3000 User’s GuideAdjustin
Page 88 and 89: MiniRAE 3000 User’s GuideTransfer
Page 90 and 91: MiniRAE 3000 User’s GuideMaintena
Page 92 and 93: MiniRAE 3000 User’s GuideTo insta
Page 94 and 95: MiniRAE 3000 User’s GuideCleaning
Page 96 and 97: MiniRAE 3000 User’s GuideSampling
Page 98 and 99: MiniRAE 3000 User’s GuideTroubles
Page 100 and 101: MiniRAE 3000 User’s GuideRAE Syst
Page 102 and 103: MiniRAE 3000 User’s GuideRAE Midd
Page 104 and 105: MiniRAE 3000 User’s GuideAlarm Si
Page 106 and 107: MiniRAE 3000 User’s GuideCharging
Page 108 and 109: MiniRAE 3000 User’s GuideWARNINGT
Page 110: MiniRAE 3000 User’s GuideInlet fl
show all

RAE MiniRAE 3000 User's Guide - Geotech

Create successful ePaper yourself

Delete template?

Save as template?