RAE MiniRAE 3000 User's Guide - Geotech

MiniRAE 3000 User’s GuideReal Time ProtocolReal Time Protocol is the setting for data transmission.The choices are:P2M (cable)P2P (cable)P2M (wireless)Point to multipoint. Data is transferred from theinstrument to multiple locations using a wiredconnection. Default data rate: 19200 bps.Point to point. Data is transferred only between theinstrument and one other location, such as acomputer. Default data rate: 9600 bps.Point to multipoint, wireless. Data is transferredwirelessly and can be received by multiplereceivers.1. Press [N/-] to step from one option to the next.2. Press [Y/+] to make your selection (the dark circle in the “radiobutton” indicates “on”).3. When you have completed your selection, press [MODE].• Press [Y/+] to save the new real-time communications protocol.• Press [N/-] to undo the change and move to the next sub-menu.Power On ZeroWhen Power On Zero is on, the instrument performs a zero calibrationwhen it is turned on.1. Press [N/-] to step from one option to the next.2. Press [Y/+] to make your selection (the dark circle in the “radiobutton” indicates your selection).3. When you have completed your selection, press [MODE].• Press [Y/+] to save the change.• Press [N/-] to discard the change and move to the next submenu.71