AED 10 User Manual - Welch Allyn

50 Programming Welch Allyn AED 10 Automated External DefibrillatorSetting the CPR timerThe CPR timer begins if a “No Shock Advised” decision is made to time the appropriatelength that CPR should be performed.CPR Timer120SaveCancelCPR Timer150SaveCancelCPR Timer150SaveCancelTo set the CPR timer1. Access the Supervisor Menu screen. Highlight CPR and press Enter. Select CPRTimer to display the CPR Timer Menu.2. Press the Next soft key to scroll through CPR timer lengths.3. Highlight Save by pressing Enter after the desired time has been selected. Press theEnter soft key again to confirm the change and return to the CPR Menu.4. To leave the time as it was originally, press Next when the Save box is highlighted toselect the Cancel box. Press the Enter soft key to return to the CPR Menu.NoteAvailable CPR timer values are 15, 30, 60, 90, 120 (default), 150, and 180 seconds.Setting the CPR tempoThe CPR Tempo is the rate at which a tone plays when the CPR Timer is running.CPR Tempo100SaveCancelCPR Tempo105SaveCancelCPR Tempo105SaveCancelTo set the CPR tempo1. Access the Supervisor Menu screen. Highlight CPR and press Enter. Select CPRTempo to display the CPR Tempo Menu.2. Press the Next soft key to scroll through CPR tempo values.3. Highlight Save by pressing Enter after the desired tempo has been selected. Pressthe Enter soft key again to confirm the change and return to the CPR Menu.4. To leave the tempo as it was originally, press Next when the Save box is highlightedto select the Cancel box. Press the Enter soft key to return to the CPR Menu.NoteAvailable CPR tempo values are 90, 95, 100 (default), 105, 110, 115, 120, andDisable.