AED 10 User Manual - Welch Allyn

76 Specifications Welch Allyn AED 10 Automated External DefibrillatorOutput Energy Accuracy Nominal AED 10 energy delivery into load is given in Table 2 .Table 2Accuracy into 50is the given nominal ±10%Accuracy into 25,75, 100, 125, 150, and 175 is the given nominal ±15%LoadEnergyselected 25 50 75 100 125 150 175150J 150 150 150 150 150 140 127200J 200 200 200 200 200 187 169300J 300 300 300 300 283 254 230360J 360 360 360 318 283 254 230Pediatric energy reducerEnergy Attenuation Factor25%, at 25 ,50 and 75 20%, at 100 and 125 15%, at 150 and 175 DisplayTypeBacklit Monochrome LCDSize2.1” x 1.42” (54 x 36 mm)Resolution 160 x 100BacklightLEDBatteryTypeCapacityShelf Life25°C ± 15°CNon-rechargeable, LiMnO 2 12V, 2.6 Ah60 discharges at 360 Joules to reach low battery warning. a90 discharges typical at 360 Joules to completely exhaust the battery or125 discharges at 200 Joules or150 discharges at 150 Joules or5 hours ECG monitoring10 years (5 years storage + 5 years standby)5 years standby (after installation)a. Capacity of discharges tested per EN 60601-2-4:2003 Clause 101.4 with the AED protocol set according to EN60601-2-4:2003 Clause102.3.2.NoteDepending on environmental conditions, patterns of use, and age, the WelchAllyn AED 10 batteries will eventually begin to indicate a low battery condition.Activities such as frequently turning on the device or leaving the device idle for anextended amount of time will decrease the life of the battery and accelerate thetimeframe for indicating a low battery warning.