AED 10 User Manual - Welch Allyn

78 Specifications Welch Allyn AED 10 Automated External DefibrillatorGuidance and manufacturer’s declaration—electromagnetic immunity(IEC 60601-1-2 Table 202)The Welch Allyn AED 10 is intended for use in the electromagnetic environment specifiedbelow. The customer or the user of the Welch Allyn AED 10 should assure that it is usedin such an environment.Immunity test IEC 60601 test level Compliance level Electromagnetic environment -guidanceElectrostatic discharge(ESD)IEC 61000-4-2Electrical fast transient/burstIEC 61000-4-4SurgeIEC 61000-4-5Voltage dips, shortinterruptions, andvoltage variations onpower supply input lines.IEC 61000-4-11Power frequency(50/60 Hz)magnetic fieldIEC 61000-4-8± 6 kV contact ± 6 kV contact Floors should be wood, concrete, or±8kVair±8kVairceramic tile. If floors are covered withsynthetic material, the relative humidityshould be at least 30%.± 2 kV for power supplylines± 1 kV for input/ outputlinesNot applicableNot applicable± 1 kV differential mode Not applicable± 2 kV common mode Not applicable95% dip in U T )for 0.5 cycle40% U T (60% dip in U T ) for5 cycles70% U T (30% dip in U T ) for25 cycles95%dip in U T )for 5 secNot applicableNot applicableNot applicableNot applicable3 A/m 10 A/m Power frequency magnetic fields shouldbe at levels characteristic of a typicallocation in a typical commercial orhospital environmentNote: U T is the ac mains voltage prior to application of the test level.