AED 10 User Manual - Welch Allyn

56 Programming Welch Allyn AED 10 Automated External DefibrillatorSetting the department nameThe supervisor has the ability to assign a specific department name to the Welch AllynAED 10. The AED 10 includes this department name number when reporting events sothat it can be identified among other AEDs.DeptSaveCancelDeptTOWNPOLICE#4SaveCancelTo set department name1. While in the Supervisor Menu, press the Next soft key to highlight Dept, and thenpress the Enter soft key to go to the Department Menu.2. Enter the desired department name by using Next to scroll to the appropriatenumber, letter, or symbol and use Enter to shift to the next space. After the lastcharacter has been selected, press Enter until Save is highlighted.3. Press Enter again while in the Save box to save the new Dept name.4. To exit the Dept name prompt without changing it, press Next when the Save box ishighlighted to select the Cancel box. Press the Enter soft key to return to theSupervisor Menu.NoteThere are 12 available characters for the Department name.Setting the bit rateThe supervisor can change the bits per second at which infrared port of the AED 10communicates.1. While in the Supervisor Menu, press the Next soft key to highlight Bit Rate, andthen press the Enter soft key to go the Bit Rate Menu.2. Press the Next soft key to change the bit rate to the appropriate number. After theappropriate number appears press the Enter soft key.3. Press the Enter soft key to save the new bit rate.4. To exit the Bit Rate menu without changing the bit rate, press Next when the Savebox is highlighted to select the Cancel box. Press the Enter soft key to return to theSupervisor Menu.