Model 7002Switch System Instruction Manual - Advanced Test ...

:STATus SubsystemIEEE-488 ReferenceArm Event Register:Bit B0 — Not used.Bit B1, Sequence 1 (Seq1) — Set bit indicates that the instrument is in an arm layer (PTR), orthat the instrument has exited from the arm layers (NTR).Bits B2 through B15 — Not used.Bit PositionB15 - B2 B1 B0EventSeq1Decimal Weighting2(21)Value0/1Value : 1 = Event Bit Set0 = Event Bit ClearedEvent : Seq 1 = Sequence 1Figure 5-20Arm Event RegisterSequence Event Register:Bit B0 — Not used.Bit B1, Layer 1 (Lay1) — Set bit indicates that instrument operation is in Arm Layer 1 (PTR),or that operation has exited from Arm Layer 1 (NTR).Bit B2, Layer 2 (Lay2) — Set bit indicates that instrument operation is in Arm Layer 2 (PTR),or that operation has exited from Arm Layer 2 (NTR).Bits B3 through B15 — Not used.5-107