Model 7002Switch System Instruction Manual - Advanced Test ...

IEEE-488 Reference5.17 :SYSTem subsystemThe system subsystem contains miscellaneous commands and are summarized in Table 5-12.Table 5-12SYSTem command summaryCommand Description Reference:SYSTem:PRESet:POSetup :POSetup?:VERSion?:ERRor?Return to :SYST:PRES defaults.Select power-on setup: RST, PRESet, SAV0-SAV9.Query power-on setup.Query revision level of SCPI standard.Query Error Queue.5.17.15.17.25.17.35.17.4Notes:1. Brackets ([ ]) are used to denote optional character sets. These optional characters do not have to be included in the program message. Do not usebrackets ([ ]) in the program message.2. Angle brackets (< >) are used to indicate parameter type. Do not use angle brackets (< >) in the program message.3. Upper case characters indicate the short-form version for each command word.4. At least one space is required between a command word and the parameter.5.17.1:PRESet:SYSTem:PRESetReturn to :SYSTem:PRESet defaultsShort-formformat:syst:presDescriptionThis command returns the instrument to states optimized for front panel operation. Table 5-5defines the default conditions for this command.ProgrammingexampleOUTPUT 707; “:syst:pres”! Return 7002 to default states5.17.2:POSetup :SYSTem:POSetup Program power-on defaultsParameters = RST Select *RST defaults on power up= PRESet Select :SYSTem:PRESet defaults on power up= SAVX Select saved defaults on power upwhere; X = 0 to 9Short-formformat:syst:pos 5-127