Model 7002Switch System Instruction Manual - Advanced Test ...

IEEE-488 Reference:STATus SubsystemProgrammingexample10 OUTPUT 707; “:stat:oper:ptr 1026; ptr?”20 ENTER 707; A$30 PRINT A$40 ENDLine 10 Sets Bits B1 and B10 of the PTR Operation Transition Filter, and then queries the register.Line 20 Addresses the 7002 to talk.Line 30 Displays the decimal value that defines which bits in the register are set (1026).5.16.4:NTRansition :STATus:OPERation:NTRansition Program Operation Transition Filter (NTR).:STATus:OPERation:TRIGger:NTRansition Program Trigger Transition Filter (NTR).:STATus:OPERation:ARM:NTRansition Program Arm Transition Filter (NTR).:STATus:OPERation:ARM:SEQuence:NTRansition Program Sequence Transition Filter (NTR).:STATus:QUEStionable:NTR Program Questionable Transition Filter (NTR).Parameters = 0 Clear NTR register= 2 Set bit B1 of NTR register= 4 Set bit B2 of NTR register= 32 Set bit B5 of NTR register= 64 Set bit B6 of NTR register= 512 Set bit B9 of NTR register= 1024 Set bit B10 of NTR registerShort-formformats:stat:oper:ntr :stat:oper:trig:ntr :stat:oper:arm:ntr :stat:oper:arm:seq:ntr :stat:ques:ntr DefaultsPower-up*CLS:STATus:PRESetClears (0) all bitsNo effectClears (0) all bitsQuerycommands:NTRansition?Short-form formats:Response message:Query NTR register:stat:oper:ntr?:stat:oper:trig:ntr?:stat:oper:arm:ntr?:stat:oper:arm:seq:ntr?:stat:ques:ntr?Decimal value (see Note)5-120