Model 7002Switch System Instruction Manual - Advanced Test ...

IEEE-488 Conformance InformationTable E-1 (continued)IEEE-488 documentation requirements(6) Functional elements required for SCPI commands. Contained in SCPI command subsystems tables.(7) Buffer size limitations for block data. Up to 20 characters for block display messages.(8) Syntax restrictions. Contained in paragraphs 5.11 through 5.18 (SCPICommand Subsystems).(9) Response syntax for every query command. Contained in paragraphs 5.9 (Common Commands)and 5.11 through 5.18 (SCPI Command Subsystems).(10) Device-to-device message transfer that does not followrules of the standard.None.(11) Block data response size. None.(12) Common Commands implemented by 7002. See paragraph 5.10.(13) Calibration query information. Not applicable.(14) Trigger macro for *DDT. Not applicable.(15) Macro information. Not applicable.(16) Response to *IDN (identification). See paragraph 5.10.5.(17) Storage area for *PUD and *PUD? Not applicable.(18) Resource description for *RDT and *RDT? Not applicable.(19) Effects of *RST, *RCL and *SAV. *RST; see paragraph 5.10.10, *RCL; see paragraph5.10.9,*SAV; see paragraph 5.10.11.(20) *TST information. See paragraph 5.10.16.(21) Status register structure. See paragraph 5.6.(22) Sequential or overlapped commands. All are sequential except :INIT, :INIT:CONT ON and*TRG which are overlapped.(23) Operation complete messages. *OPC; see paragraph 5.10.6,*OPC?; see paragraph 5.10.7,*WAI; see paragraph 5.10.17.E-2