OPERATION MANUAL - Scintrex

Operating the CG-5 in the FieldImportant:Your baud rate, data bits and stop bits have to be thesame on your CG-5 and your PC. Furthermore thedata bits, parity and stop bit are fixed on your CG-5,you can never change these. You need only to set thecom port and the baud rate.Select flow control. Chose either “none” or Xon /Xoff depending on what works for your system.To select your com port, click on the down arrowlocated beside the com1 selection.The following screen will then appear:Select the desired com port. In most cases, this willbe com1.3-46CG-5 Manual - part # 867700 Revision 2