OPERATION MANUAL - Scintrex

• *.SGD (Scintrex proprietary format)• *.TXT (full ASCII headers and data)• *.XYZ (ASCII data only spreadsheet)• *.SMP (Raw sample values)ForewordData StorageData can be stored either as individual readings or raw samples (digitized at 5x per second for post-processing). Note and calibration information is alsostored in the system.Station Designation SystemMultiple station designation systems are supported including:• NSEWm (Line 100N, Station 20S)• NSEWft (Line 100N, Station 20S)• XYm (Line 100, Station -20)• XYft (Line 100, Station -20)• UTM (Easting 548906E, Northing 5432145S)• LAT/LONG (Longitude 49E 50’ 34”, Latitude 12N, 13’, 22”)Near Terrain CorrectionsThe system enables entry of Hammer chart-type data in a graphic format andautomatically corrects data for elevation and density.Remote ControlFor users who wish to install and monitor gravity readings remotely, thesystem can be operated in this mode.Smart Battery StatusThe CG-5 monitors the Smart Batteries and their capacity level to provide theoperator with an actual report of time left in hours so that batteries can bereplaced as required in the field.xviiCG-5 Manual - part # 867700 Revision 2