OPERATION MANUAL - Scintrex

Setting Up Your InstrumentPress the up or down arrow keys to bring yourcursor to the parameter you want to modify.Following is a list of parameters and values. Notethat when you select a parameter, the cursor isautomatically positioned in the field ready forediting.Read Time:Duration in seconds over which you want to recorddata. Allowed values are from 1 to 256.Cycle Time:This parameter is only active in base station modewhen the # of Cycles is set to 99999.The cycle time is the interval in seconds over whichyou want to repeat readings. Allowed values are upto 99999 s.Note:The minimum value must be 20 s greater than thespecified read time (to allow for instrument-relateddata management activities).If you set a cycle time of 2000 s, the system wouldrecord a reading every 2000 s.#of Cycles:Number of times a reading is automaticallyrepeated in auto-repeat mode. Also activates thebase station mode (by entering 99999). Allowedvalues are 0 to 99999.2-20CG-5 Manual - part # 867700 Revision 2