OPERATION MANUAL - Scintrex

Recording DataTo measure data with the Autograv, select theMeasurement icon in the CG5REMOTE screen. Thesystem displays the following screen.This screen enables you to start the measurementprocess on the CG-5 remotely and to display datadirectly to your Personal Computer. To initiate thisprocess, press the Start Measuring key.Note:On the CG-5, you will notice that the instrumentstarts reading data. It first displays a strip chartrecorder screen followed by the Autograv Final Datascreen which shows numeric values for gravity,standard deviation and other parameters.Watch your Personal Computer to monitor the dataas it is displayed on your system. Gravity andstandard deviation are the key parameters plotted inthe strip recorder display. Numeric values aredisplayed to the left of the strip recorder.A-18CG-5 Manual - part # 867700 Revision 2