OPERATION MANUAL - Scintrex

Applying Tilt CorrectionsPRESSF3Press the F3 key to highlight theEDIT function as follows:EDITMaintenancePress the up or down arrow keys to bring yourcursor to the read time parameter. Note that thecursor is automatically positioned in the field readyfor editing.Set the read time to 60 sec, the cycle time to 75 secand No. of cycles to 0. In a quiet location the readtime can be reduced to say 30sec, while in a noisylocation it should be increased - to, say, 120 sec.Before leaving the Options Screen set the start delayto 4 sec so that the instrument can stabilize,undisturbed, before the reading starts.PRESSF5Press the F5 key. Your changes have been updated.Access the Service menu.In the set-up screen, press the arrow keys to bringthe cursor to the service icon.The word Service is highlighted, as illustratedbelow:Service5-19CG-5 Manual - part # 867700 Revision 2