OPERATION MANUAL - Scintrex

Using the Dump ScreenUsing the Dump ScreenThe dump screen enables you to set the baud rate for communicating via anRS-232C standard connection.Important:This screen is NOT applicable for dumping via theUSB port. For information on USB dumping, pleasesee “Dumping Data” on page 3-38.Setting Up for Data Dumping via RS-232CThe following sections relate to RS-232 dumping. To dump via RS-232C,you must set communication parameters (i.e. baud rate) BOTH on the CG-5and then in the SCTUTIL program which controls the actual dumpingprocess.Setting the Baud RateUse the arrow keys to navigate to the DUMP icon inthe SETUP screen. The word Dump will then behighlighted, as illustrated below:DumpSetup2-25CG-5 Manual - part # 867700 Revision 2