OPERATION MANUAL - Scintrex

Erasing MemoryAs you acquire measurements, you will want toperiodically check the memory and ensure that thereis enough space available for future measurements.If not, you can dump data and erase the memory.To check or erase the Autograv memory, select theMemory icon in the CG5REMOTE screen. Thesystem displays the following screen.This screen enables you to view the memoryavailable for recording data and to clear the Flashmemory. To initiate this process, press the ClearMemory button. The CG-5 shows a status bar thatshows the progress of the memory clearing process.You also see a copy of this status bar on yourPersonal Computer.When completed, the system displays a “MemoryErased” message on your Personal Computer screen.Press the OK key to remote this message from yourscreen.A-22CG-5 Manual - part # 867700 Revision 2