OPERATION MANUAL - Scintrex

Maintaining Your CG-5 and Trouble-shootingBattery does notappear to bereporting its statuscorrectly on theCG-5 screenDisplay changesslowlyInternal battery chargerneeds to be resetAmbient temperature istoo cold for the displayto operate properly.Reset the battery controller byremoving a battery or disconnectingthe external power supply cable fora few secondsKeep console warm.Purchase optional display heater.RS-232 or USB cable Connect cable. For information, seeis not connected “Dumping Data” on page 3-38.between CG-5 and PC.Data doesnot dumpRS-232 or USB cableis not connected to PCConnect cable. For information, see“Dumping Data” on page 3-38.Instrument does notrespond even afterthe reset proceduredescribed aboveFile transfer program isnot installed properlyInstrument needs coldbootCheck installation of SCTUTILprogram. For information,see“Installing SCTUTIL” onpage D-2.Switch instrument off with theON/OFF key. Hold down theSETUP key while switchinginstrument on again with theON/OFF key. If you wish to restorethe default settings first dump yourdata by USB as instructed5-36CG-5 Manual - part # 867700 Revision 2