OPERATION MANUAL - Scintrex

Operating the CG-5 in the FieldPress the up or down arrow keys to bring yourcursor to the parameter (ex. Easting:) you want tomodify.The selected parameter is highlighted as indicatedbelow:Easting:PRESSMEASURECLRPress the MEASURE CLR key to remove anyexisting values in the field.Type the easting value followed by either a E or Wto indicate whether the station is in the east or westquadrant.Use the arrow keys to move to the Northing fieldand repeat this process as required.PRESSF3Note:The Line values must be opposite to the directionselected for the station (i.e. if you have selected Nand S for stations, then lines must be designated as Eand W).Press the F3 key to save yourchanges.3-6CG-5 Manual - part # 867700 Revision 2