obd2cartool.com Tech-2-User-Guide

More documents

Recommendations

Info

1. Ensure the connection of the DLC (VCI) loopback adapter (Part Number 3000109) to the VCI module of the Tech 2. 2. Navigate to the self test option: At the Tech 2 Main Menu, select F3: Tool Options, and then choose Self Test. 3. Select the test F2: Automated VCI. Screen 1 (shown below) should appear if the test passes. (Note: If failures are noticed on the CCD test and the HBCC test, these will not affect diagnostics on GM vehicles.) 4. Select F4: Selectable VCI and press the More Test soft key. Choose F1: VCI Dual Uart. Screen 2 appears if the test passes. 5. Select F5: VCI J1708, and Screen 3 will display. 6. Select F6: VCI TPU, and Screen 4 will display. NOTE: GM Tech 2 / VCI / Cable Test When performing the TPU test, it is critical that TPU12 and TPU15 indicate “Pass.” If these two TPU channels indicate “Fail,” or if they are not present in the above list, then the VCI module for the Tech 2 is possibly damaged. Screen 1 Screen 2 Screen 3 Screen 4 7. Insert the DLC Burndy cable into the Tech 2/VCI and the DLC loopback adapter at the end of the cable and repeat the tests listed above. (Note: When running the VCI TPU test, TPU12 and TPU15 must show up as pass. If they indicate, “fail,” or if they are not present on the screen, then the cable might be damaged. This is assuming that TPU12 and TPU15 passed with the VCI loopback adapter connected directly into the VCI. Also, when performing the VCI TPU test, TPU13 and TPU14 will not appear on the screen when running this test with the DLC Burndy cable inserted into the Tech 2/VCI and the loopback adapter at the end of the cable.)
7 1 2 3 6 5 4 1. Keypad 2. Power on and off button 3. DLC cable connection 4. VCI (Vehicle Communications Interface) latching lever 5. Adjustable strap 6. Tilt stand 7. Display
Page 1 and 2:
Tech 2 User’s Guide CONTENTS I. I
Page 3 and 4:
Customer Support Overview To obtain
Page 5 and 6:
Declaration of Conformity According
Page 7 and 8:
SECTION I INTRODUCTION Using This M
Page 9 and 10:
SECTION I INTRODUCTION NOTICE • D
Page 11 and 12:
SECTION I INTRODUCTION Tech 2 Overv
Page 13 and 14:
SECTION I INTRODUCTION Mechanical D
Page 15 and 16:
SECTION II CARE & CLEANING Care and
Page 17 and 18:
SECTION III GETTING STARTED Getting
Page 19 and 20:
SECTION III GETTING STARTED PCMCIA
Page 21 and 22:
SECTION III GETTING STARTED Tech 2
Page 23 and 24:
SECTION III GETTING STARTED Action
Page 25 and 26:
SECTION III GETTING STARTED Tech 2
Page 27 and 28:
SECTION IV POWER SUPPLIES Power Sup
Page 29 and 30:
SECTION IV POWER SUPPLIES NAO Power
Page 31 and 32:
SECTION V ADAPTERS RS-232 DB9 Adapt
Page 33 and 34:
SECTION VI TROUBLESHOOTING Power On
Page 35 and 36:
SECTION VI TROUBLESHOOTING Tech 2 S
Page 37 and 38:
SECTION VI TROUBLESHOOTING F1: Auto
Page 39 and 40:
SECTION VI TROUBLESHOOTING F4: Sele
Page 41 and 42:
SECTION VI TROUBLESHOOTING Cigarett
Page 43 and 44:
SECTION VI TROUBLESHOOTING CANdi Mo
Page 45 and 46:
SECTION VI TROUBLESHOOTING CANdi Mo
Page 47 and 48:
SECTION VI TROUBLESHOOTING Testing
Page 49 and 50:
SECTION VI TROUBLESHOOTING Replacin
Page 51 and 52:
SECTION VII SOFTWARE Software Secti
Page 53 and 54:
SECTION VIIA TECH 2 MAIN MENU & LIV
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
SECTION VIIA 5. Using soft keys, th
Page 65 and 66:
SECTION VIIB TIS SOFTWARE Tech 2 Vi
Page 67 and 68:
SECTION VIIB TIS SOFTWARE J-45080 3
Page 69 and 70:
SECTION VIIB TIS SOFTWARE 7. A “P
Page 71 and 72: SECTION VIIB TIS SOFTWARE Snapshot
Page 73 and 74: SECTION VIIB TIS SOFTWARE Uploading
Page 75 and 76: SECTION VIIB TIS SOFTWARE Single-Co
Page 77 and 78: SECTION VIIB TIS SOFTWARE 3. To det
Page 79 and 80: SECTION VIIB TIS SOFTWARE Displayin
Page 81 and 82: SECTION VIIB TIS SOFTWARE Lock / Un
Page 83 and 84: SECTION VIIB TIS SOFTWARE 5. Click
Page 85 and 86: SECTION VIIB TIS SOFTWARE Printing
Page 87 and 88: SECTION VIIC SERVICE PROGRAMMING SY
Page 117 and 118: SECTION VIID CANDI MODULE CANdi Mod
Page 119 and 120: SECTION VIID CANDI MODULE Connectio
Page 121: SECTION VIID CANDI MODULE CANdi War
Page 125 and 126: Additional Tech 2 adapters and acce
Page 127 and 128: The part number for the PCMCIA kit
Page 129 and 130: 2 1 1. RS-232 port 2. RS-232 loopba
Page 131 and 132: 1 2 1. Tech 2 DLC cable (P/N 300009
Page 133 and 134: 1 2 1. Tech 2 power jack connector
Page 135 and 136: 1 2 1. Empty lower PCMCIA slot 2. U
Page 137 and 138: 1. Tech 2 PCMCIA card 1
Page 139 and 140: 1 2 1. VCI module lever (moved all
Page 141 and 142: 1 6 5 2 2 4 3 1. Soft keys 2. Actio
Page 146: 1 4 3 2 1. Highlighted (selected) a
Page 151 and 152: 1 2 3 1. Cigarette lighter power ca
Page 153: 1 2 4 3 1. Serial port adapter (P/N
Page 156 and 157: 1 2 1. NAO power supply (110 volts)
Page 158 and 159: 1 3 2 1. VCI cable connector (26-pi
Page 160 and 161: 3 1 2 1. Detail of 8-pin RJ45 conne
Page 162: 1 2 1. Burndy cable connection end
Page 168 and 169: DAY MONTH DATE YEAR TIME : : Test C
Page 170 and 171: DAY MONTH DATE YEAR TIME : : Test C
Page 173:
VCI MODULE DIAGNOSTIC CHART Test Re
Page 177:
VCI MODULE DIAGNOSTIC CHART Test Re
Page 189:
POWER SOURCE: CIGARETTE LIGHTER POW
Page 193:
POWER SOURCE: NAO OR UNIVERSAL POWE
Page 196:
1 3 2 1. Battery power cable 3-amp
Page 233 and 234:
1 2 3 4 5 6 7 1. Exit TIS 2. Select
Page 245:
1 2 3 4 5 6 7 8 9 10 11 12 13 KEY 1
Page 302 and 303:
2 1 1. SPS Off-Board Programming Ad
Page 310:
Tech 2 existing VCI existing DLC ca
show all

obd2cartool.com Tech-2-User-Guide

Create successful ePaper yourself

Delete template?

Save as template?