obd2cartool.com Tech-2-User-Guide

SECTION III
GETTING STARTED
Action Keys
Action keys are used to respond to a specific question, initiate an action, or to exit from the Tech 2
program (Figure III-20). Specific “yes or no” questions will often appear on the Tech 2 screen. The [YES]
and [NO] keys are used to respond to these questions. Either of the two [ENTER] keys may be pressed to
activate a menu selection. Either of the two [EXIT] keys may be pressed to leave the current Tech 2
screen and return to a previous screen.
Figure III-20
Location of action keys
Function Keys
Ten function keys (F0 to F9) are located on the Tech 2 keypad (Figure III-21). A function key may be
pressed to initiate a specific Tech 2 function. In some cases the function keys are used for numeric data
entry. The arrow keys and [ENTER] may also be used to initiate a function selection, but this will require
multiple keystrokes as opposed to only one.
Figure III-21
Location of function keys
Help Key
The help key [?] may be pressed at any time to obtain a help screen (Figure III-22). The help screen will
provide specific information relating to the operation of the Tech 2.
Figure III-22
Location of help key
2005 Tech 2 User’s Guide III - 7