obd2cartool.com Tech-2-User-Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SECTION VIIB<br />
TIS SOFTWARE<br />
Diagnostic Trouble Code Change Mode<br />
This feature allows the user to move from trouble code to trouble code within the snapshot. If you select<br />
the View DTC Information icon, when in a snapshot the Snapshot application will display a split screen.<br />
This screen will consist of the DTC information on the upper half of the screen and the parameter data<br />
display on the lower half of the screen (Figure VIIB-18).<br />
If the DTC was not set in the selected frame of the snapshot, the DTC information will not display until the<br />
snapshot is advanced to the first frame in which the DTC was set. Select the Diagnostic Trouble Code<br />
Change icon (Figure VIIB-19) to advance to the first frame of the DTC. In DTC change mode, selecting the<br />
forward or reverse arrows will move the application to only the frames in which a DTC was set.<br />
Figure VIIB-19<br />
“DTC Change” icon selected while in DTC display mode<br />
2005 <strong>Tech</strong> 2 <strong>User</strong>’s <strong>Guide</strong> VII - 28