obd2cartool.com Tech-2-User-Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION II<br />
CARE & CLEANING<br />
Care and Cleaning<br />
After using the <strong>Tech</strong> 2, a few simple steps will insure that you get the most life out of this diagnostic tool.<br />
NOTICE<br />
Do not spray or pour cleaner anywhere on the <strong>Tech</strong> 2. If the <strong>Tech</strong> 2 should be<strong>com</strong>e dirty, clean it with a<br />
mild detergent or hand soap. Avoid using harsh solvents such as petroleum-based cleaning agents:<br />
acetone, benzene, trichlorethylene, etc. Harsh solvents can etch <strong>Tech</strong> 2 plastic surfaces.<br />
Although the <strong>Tech</strong> 2 is water resistant it is not waterproof, so be sure to thoroughly dry off the <strong>Tech</strong> 2<br />
prior to usage and/or storage.<br />
Maintenance of the <strong>Tech</strong> 2 requires periodic inspection and cleaning of:<br />
• The display window<br />
• The keypad<br />
• The cable assemblies and connectors<br />
Make sure the <strong>Tech</strong> 2 is not connected to a vehicle or other power source and follow the cleaning<br />
procedures detailed below.<br />
Please see next page...<br />
2005 <strong>Tech</strong> 2 <strong>User</strong>’s <strong>Guide</strong> II - 1
Change language