obd2cartool.com Tech-2-User-Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SECTION VIIA<br />
TECH 2 MAIN MENU & LIVE PLOT<br />
F0: Set Clock<br />
After you select F0: Set Clock from the Tool Options menu (Figure VIIA-3) and the Set Real-Time Clock<br />
menu (Figure VIIA-4) appears, you can set the internal <strong>Tech</strong> 2 real-time clock in two ways:<br />
1. Use the up and down arrow keys to move the cursor to desired selection. Press [ENTER] to change the<br />
value. Each time [ENTER] is pressed the value will be increased by one unit until a preset maximum<br />
unit is reached. Once all correct values are entered, press the Set Clock soft key to save all changes.<br />
2. Use the function key of the desired selection to change an incorrect value. Each time the function key is<br />
pressed the value will be increased by one unit until a preset maximum is reached. Once all correct<br />
values are entered, press the Set Clock soft key to save all changes.<br />
Figure VIIA-4<br />
Set Real-Time Clock menu<br />
Tool Options continued on next page...<br />
2005 <strong>Tech</strong> 2 <strong>User</strong>’s <strong>Guide</strong> VII - 6